ENH-MA9120 9.6V 3Ah Ni-MH Power Tool Replacement Battery 9120 for Makita 6014DW / 6200D / 6201D / 6202D / T422D / DA392D Drills Angle Drills and Job Site Lights

The ENH-MA9120 replacement battery is fully compatible with the following Makita 9120 power tool, flashlight and job site radio models:

✅ 3Ah 28.8Wh High-Drain Ni-MH for the Makita 9.6V Fleet
Direct replacement for the Makita OEM battery 9120, purpose-built to cover 24 tools in a single SKU - the 6000 series driver-drill fleet (6014DW / 6200D / 6201D / 6201DWH / 6202D / 6221D), the T-series drills (T1022D / T221D / T422D and variants), the DA392 angle drill family and the BMR100 job site radio with the ML901 / ML903 flashlights. One battery standard for your mixed Makita 9.6V fleet means unified procurement and simplified rotation.

✅ Sustained High-Current Output Under Load
Premium high quality long-cycle Ni-MH cells deliver stable 9.6V output with the sustained high-current discharge that drilling, driving and fastening demand - no significant power sag when the tool bites into the workpiece. Ni-MH chemistry is memory-manageable and cadmium-free, tolerates deep discharge cycles and hard jobsite handling, and the 3Ah 28.8Wh capacity keeps you working through extended sessions between charges.

✅ Faithful OEM-Spec Fit, Rugged Red Housing
The 8.8*7.8*10.3 cm housing faithfully follows the original battery dimensions and latch geometry for a true plug-and-play fit - slide the pack on, hear the latch click, and the tool is ready to work. The red high impact ABS/PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

• ⭐ Makita 9120 Replacement - Matches the original battery family for a drop-in fit across all 24 listed models without modification
• ⭐ 3Ah 28.8Wh Capacity - Full 9.6V Ni-MH capacity for extended drilling, driving and fastening sessions
• ⭐ High-Drain Cell Design - Sustained high-current delivery for demanding applications with no significant power sag under load
• ⭐ 24 Tools, One SKU - Covers drills, angle drills, flashlights and the job site radio with a single battery standard
• ⭐ Rugged Jobsite Housing & Warranty - Red high impact ABS/PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit - a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Ni-MH compatible charger designed for the Makita 9120 battery family (negative delta-V charging logic). Do NOT use a Li-ion charger with CC/CV logic on this Ni-MH battery - the charging logic is completely different and may cause under-charge, overheating or permanent damage.

• ⚠ Let the pack cool down after heavy use before recharging, and charge in a dry area at room temperature. For long-term storage, keep the pack in a cool dry place and check it every 2-3 months. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations - do not put them in household waste.