ENH-MA1220 12V 3Ah Ni-MH Power Tool Replacement Battery 1220 / PA12 for Makita 1050D / 1050DA / 4013D / 4331D / 6316D / 6918D / 8413D Drills Drivers Saws and Job Site Lights

The ENH-MA1220 replacement battery is fully compatible with the following Makita 1220 / PA12 power tool and job site light models:

✅ 3Ah 36Wh High-Drain Ni-MH for the Makita 12V Fleet
Direct replacement for the Makita OEM battery 1220 / PA12, purpose-built to cover 114 tools in a single SKU - the 1050D / 4013D / 4191D / 4331D / 5093D saw and multitool lines, the 6213 / 6217 / 6223 / 6227 / 6270 and 6313 / 6316 / 6317 / 6319 driver-drill fleets, the 6835 screwdriver series, the 6914 / 6916 / 6917 / 6918 / 6980FD impact drivers and wrenches, the 8270 / 8413 / 8414 hammer drills, the DA312D angle drills and the ML120-124 / UB120 / UC120-170 / VR250-251 job site lights and outdoor tools. One battery standard for your mixed Makita 12V fleet means unified procurement and simplified rotation.

✅ Sustained High-Current Output Under Load
Premium high quality long-cycle Ni-MH cells deliver stable 12V output with the sustained high-current discharge that drilling, driving and sawing demand - no significant power sag when the tool bites into the workpiece. Ni-MH chemistry is memory-manageable and cadmium-free, tolerates deep discharge cycles and hard jobsite handling, and the 3Ah 36Wh capacity keeps you working through extended sessions between charges.

✅ Faithful OEM-Spec Fit, Rugged Red Housing
The 13.0*9.0*10.0 cm housing faithfully follows the original battery dimensions and latch geometry for a true plug-and-play fit - slide the pack on, hear the latch click, and the tool is ready to work. The red high impact ABS/PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

• ⭐ Makita 1220 / PA12 Replacement - Matches the original battery family for a drop-in fit across all 114 listed models without modification
• ⭐ 3Ah 36Wh Capacity - Full 12V Ni-MH capacity for extended drilling, driving, cutting and fastening sessions
• ⭐ High-Drain Cell Design - Sustained high-current delivery for demanding applications with no significant power sag under load
• ⭐ 114 Tools, One SKU - Covers drills, drivers, saws, multitools, flashlights, worklights and outdoor tools with a single battery standard
• ⭐ Rugged Jobsite Housing & Warranty - Red high impact ABS/PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit - a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Ni-MH compatible charger designed for the Makita 1220 / PA12 battery family (negative delta-V charging logic). Do NOT use a Li-ion charger with CC/CV logic on this Ni-MH battery - the charging logic is completely different and may cause under-charge, overheating or permanent damage.

• ⚠ Let the pack cool down after heavy use before recharging, and charge in a dry area at room temperature. For long-term storage, keep the pack in a cool dry place and check it every 2-3 months. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations - do not put them in household waste.