📞 Tel:+86-750-3857665

Email:sales@enpowertec.com

ENC-MA9000 replacement for MAKITA Battery 9000

enpower P/N:ENC-MA9000

oem battery:9000

Part Number:

Manufacturer (OEM):

oem model:

chemistry:NICAD

voltge:9.6V

capacity:1.5AH14.4WH

Voltage/Capacity:

Demension (H*W*D)(cm):18.1*4.9*2.75

compatible radio:

Description:Power Tool Replacement Battery 9000 for Makita 4093D 4190D 4190DB 4190DW 4190DWD 4300D 4300DW 4390D

compatible models:"MAKITA 9.6 Volt Cordless Drill Power Tools 4093D, 4190D, 4190DB, 4190DW, 4190DWD, 4300D, 4300DW, 4390D, 4390DW, 5090D, 5090DW, 6012HD, 6012HDL, 6012HDW, 6092D, 6092DW, 6093D, 6093DW, 6094D, 6094DW, 6095D, 6095DW, 6095DWBE, 6095DWDE, 6095DWL-2, 6096D, 6096DW, 6096DWBE, 6096DWE, 6096DWLE, 6891D, 6891DW, 6900D, 6900DW, 8400D, 8402DW, 8402VD, 8402VDW, 903D, 903DW, DA390D, DA390DW, DA391D, DA391DW, DA391DWB, DA391DWD, ML900 (Flashlight), ML902 (Flashlight), T220D, T220DW, UM1690D, UM1691D "

PRODUCT INFORMATION

ENC-MA9000 9.6V 1.5Ah Ni-CD Power Tool Battery 9000 for Makita 4093D 4190D 6095D 6096D DA391D | Enpower

ENC-MA9000 9.6V 1.5Ah Ni-CD Power Tool Replacement Battery 9000 for Makita 9.6 Volt Cordless Drill Power Tools 4093D / 4190D / 5090D / 6095D / 6096D / DA391D and More

Enpower ENC-MA9000 heavy-duty Ni-CD rechargeable battery engineered as a faithful OEM-spec replacement for the Makita 9000 battery family - the classic 9.6 Volt stick-style pack that powers a huge share of Makita's long-running cordless drill lineup. One pack covers 52 Makita tools in a single SKU: the 4000 / 5000 series drills (4093D / 4190D / 4190DB / 4190DW / 4190DWD / 4300D / 4300DW / 4390D / 4390DW / 5090D / 5090DW), the 6012HD heavy-duty line, the hugely popular 6092-6096 drill and driver fleet (6092D / 6093D / 6094D / 6095D / 6096D with all their DW / DWBE / DWDE / DWL-2 variants), the 6891D / 6900D drivers, the 8400 / 8402 series (8400D / 8402DW / 8402VD / 8402VDW), the 903D screwdrivers, the DA390 / DA391 angle drill family, the ML900 / ML902 flashlights, plus the T220D drills and UM1690D / UM1691D. Built around premium high quality long-cycle Ni-CD cells with a stable 9.6V nominal voltage and a full 1.5Ah 14.4Wh capacity, the pack delivers the sustained high-current output that drilling, driving and fastening demand under load. Ni-CD chemistry is the proven workhorse for tough jobsites: it tolerates deep discharge cycles, charges reliably in cold weather down to around -10 degrees C, shrugs off hard handling, and its memory effect is fully manageable with periodic full-discharge refresh cycles. The slim 18.1*4.9*2.75 cm stick housing faithfully follows the original battery dimensions and latch geometry for a plug-and-play fit with no modification, and the black high impact ABS/PC composite shell stands up to jobsite drops, dust and moisture. Manufactured in Guangdong China with 12-month full quality warranty.

Basic Product Information

Brand
Enpower
Model No.
ENC-MA9000
Applicable Equipment
Power Tool (Cordless)
Matching OEM Models
9000
Battery Type
Ni-CD (Nickel-Cadmium)
Nominal Voltage
9.6V
Nominal Capacity
1.5Ah (14.4Wh)
Overall Size (H*W*D)
18.1*4.9*2.75 cm (181*49*27.5 mm)
Weight
384g
Color
Black
Shell Material
High Impact ABS/PC
Cell Quality
High Quality Long Cycle Ni-CD Cells
Application
Power Tools / Home Appliances / Consumer Electronics
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
OEM / ODM
Available
Warranty Period
12 Months

Compatible Models

The ENC-MA9000 replacement battery is fully compatible with the following Makita 9.6 Volt cordless drill power tool and flashlight models:

4093D 4190D 4190DB 4190DW 4190DWD 4300D 4300DW 4390D 4390DW 5090D 5090DW 6012HD 6012HDL 6012HDW 6092D 6092DW 6093D 6093DW 6094D 6094DW 6095D 6095DW 6095DWBE 6095DWDE 6095DWL-2 6096D 6096DW 6096DWBE 6096DWE 6096DWLE 6891D 6891DW 6900D 6900DW 8400D 8402DW 8402VD 8402VDW 903D 903DW DA390D DA390DW DA391D DA391DW DA391DWB DA391DWD ML900 ML902 T220D T220DW UM1690D UM1691D

Product Description & Core Advantages

✅ 1.5Ah 14.4Wh Ni-CD for the Makita 9.6V Stick-Pack Fleet
Direct replacement for the Makita OEM battery 9000, purpose-built to cover 52 tools in a single SKU - the 4000 / 5000 series drills (4093D / 4190D / 4300D / 4390D / 5090D and variants), the 6012HD heavy-duty line, the hugely popular 6092-6096 drill and driver fleet with all their DW / DWBE / DWDE / DWL-2 variants, the 6891D / 6900D drivers, the 8400 / 8402 series, the 903D screwdrivers, the DA390 / DA391 angle drill family, the ML900 / ML902 flashlights, plus the T220D drills and UM1690D / UM1691D. One battery standard for your mixed Makita 9.6V fleet means unified procurement and simplified rotation.

✅ Proven Ni-CD Durability, Cold-Weather Reliable
Premium high quality long-cycle Ni-CD cells deliver stable 9.6V output with the sustained high-current discharge that drilling, driving and fastening demand - no significant power sag when the tool bites into the workpiece. Ni-CD chemistry tolerates deep discharge cycles, charges reliably in cold jobsite conditions down to around -10 degrees C, and shrugs off drops, vibration and hard handling. Its memory effect is fully manageable - periodic full-discharge refresh cycles keep the pack at rated capacity for years.

✅ Faithful OEM-Spec Fit, Rugged Black Housing
The slim 18.1*4.9*2.75 cm stick housing faithfully follows the original battery dimensions and latch geometry for a true plug-and-play fit - slide the pack on, hear the latch click, and the tool is ready to work. The black high impact ABS/PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

  • ⭐ Makita 9000 Replacement - Matches the original battery family for a drop-in fit across all 52 listed models without modification
  • ⭐ 1.5Ah 14.4Wh Capacity - Full 9.6V Ni-CD capacity for dependable drilling, driving and fastening sessions
  • ⭐ High-Drain Cell Design - Sustained high-current delivery for demanding applications with no significant power sag under load
  • ⭐ 52 Tools, One SKU - Covers drills, drivers, screwdrivers, angle drills, flashlights and more with a single battery standard
  • ⭐ Rugged Jobsite Housing & Warranty - Black high impact ABS/PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

Related Power Tool Batteries

Safety Cautions

  • ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause alkaline electrolyte leakage, overheating or fire. If electrolyte contacts skin or eyes, flush immediately with plenty of clean water and seek medical attention. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.

  • ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit - a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods.

  • ⚠ Only charge with a Ni-CD compatible charger designed for the Makita 9000 battery family. Do NOT use a Li-ion charger with CC/CV logic on this Ni-CD battery - the charging logic is completely different and may cause under-charge, overheating or permanent damage. Many Makita Ni-MH chargers also support Ni-CD, but always confirm your charger label explicitly lists Ni-CD before use.

  • ⚠ To manage memory effect, run the pack through a full discharge every 10-15 cycles before recharging. Let the pack cool down after heavy use, and charge in a dry area at room temperature. For long-term storage, keep the pack in a cool dry place and check it every 2-3 months. This battery contains cadmium - dispose of spent packs ONLY at an authorized battery recycling collection point in compliance with local regulations; never put them in household waste.

Frequently Asked Questions

Q1: Is ENC-MA9000 fully compatible with OEM 9000 and all the listed Makita tools?-
A: Yes. ENC-MA9000 is a faithful OEM-spec replacement for the Makita 9000 battery family, with identical 9.6V nominal voltage and a slim stick housing that follows the original dimensions and latch geometry for a plug-and-play fit. It works with all 52 models listed in the compatibility table above - including the 4000 / 5000 series drills (4093D / 4190D / 4300D / 4390D / 5090D and variants), the 6012HD heavy-duty line, the 6092-6096 drill and driver fleet with all DW / DWBE / DWDE / DWL-2 variants, the 6891D / 6900D drivers, the 8400 / 8402 series, the 903D screwdrivers, the DA390 / DA391 angle drill family, the ML900 / ML902 flashlights, plus the T220D drills and UM1690D / UM1691D. No modification required.
Q2: How do I confirm that my tool uses the 9000 battery?+
A: The most reliable way is to check two things: the OEM part number printed on your existing pack and the voltage marked on your tool. If your pack reads 9000 and your tool is a 9.6V Makita model from the compatibility table above, ENC-MA9000 is the correct replacement. The original pack is a slim stick-style battery roughly 18 cm long; if your tool takes a compact pod-style pack instead, it belongs to a different Makita platform - send us a photo of your current battery and tool model, and our team will confirm fitment before you order.
Q3: Can I charge ENC-MA9000 on a Li-ion charger or my Ni-MH charger?+
A: No Li-ion chargers. This is a Ni-CD pack and requires a charger designed for the Makita 9000 Ni-CD battery family - for example your original Makita Ni-CD charger. Li-ion chargers use CC/CV (constant current / constant voltage) logic with a 4.2V-per-cell cutoff, which is completely different and may cause under-charge, overheating or permanent damage on Ni-CD cells. Many Makita Ni-MH chargers do support Ni-CD packs, but always check the charger label: use it only if it explicitly lists Ni-CD as a supported chemistry.
Q4: Will ENC-MA9000 also fit Makita 7.2V / 12V / 14.4V / 18V tools, other brands, or two-way radios?+
A: No. ENC-MA9000 (replacement for OEM 9000) is designed ONLY for the 9.6V Makita tools listed in the compatibility table above. Other voltage platforms - 7.2V / 12V / 14.4V / 18V Makita families - use physically different packs with different cell counts, housings and latches that are NOT interchangeable. Other power tool brands (Bosch, DeWalt, Hitachi/HiKOKI, Milwaukee, Ryobi and others) use their own proprietary pack designs. The same applies across product categories: two-way radio batteries (Motorola NTN / HNN / PMNN / NNTN, ICOM BP-, KENWOOD KNB-, Vertex FNB-, Hytera BH/BL series) have completely different housings, contacts and voltages and must never be used in power tools. Always match the OEM battery part number and the voltage printed on your tool before ordering.
Q5: Ni-CD or Ni-MH - which chemistry should I choose for my Makita 9.6V tools?+
A: Both chemistries work on the same 9.6V platform - the right choice depends on your priorities. This ENC-MA9000 Ni-CD pack offers proven durability, reliable cold-weather charging down to around -10 degrees C and a lower entry cost, with memory effect kept under control by periodic full-discharge refresh cycles. Ni-MH packs deliver more runtime per charge, are cadmium-free and have no memory effect, making them the better pick for daily high-intensity use and environmental compliance. If you prefer Ni-MH, see the NiMH Power Tool Battery linked in the Related section below - our sales team can also quote a Ni-MH version for your specific 9000-platform tools.

Contact Us & Send Inquiry