📞 Tel:+86-750-3857665

Email:sales@enpowertec.com

ENC-MA1420 Makita replacement battery

enpower P/N:ENC-MA1420

oem battery:1420, PA14

Part Number:

Manufacturer (OEM):

oem model:

chemistry:NICAD

voltge:14.4V

capacity:1.5AH21.6WH / 2AH28.8WH

Voltage/Capacity:

Demension (H*W*D)(cm):9.42* 9.34*10.91

compatible radio:

Description:Power Tool Replacement 1420 PA14 for For Makita 6280DWAE 6280DWPE 6281D 6333D 6333DA 6333DWA

compatible models:"6280DWAE, 6280DWPE, 6281D, 6333D, 6333DA, 6333DWA, 6333DWAE, 633DWBE, 6336D 6336DWA, 6336DWAE, 6336DWB, 6336DWBE, 6336DWDE, 6337D, 1051D, 1051DWA 1051DWAE, 1051DWD, 1051DWDE, 1051DWF, 1051DWFE, 1051DZ, 4033D, 4033DZ, 4332D 4333D, 4333DWAE, 4333DWD, 4333DWDE, 4333DZ, 5094DWD, 5630DWD, 6228DW, 6228DWAE - 6228DWBE, 6228DWE, 6233D, 6233DWAE, 6233DWBE, 6236DWBE, 6236DWDE, 6237D 6237DWDE, 6337DWAE, 6337DWDE, 6337DWDESP, 6337DWFE, 6339DWDE, 6339DWFE, 6381D 6932FD, 6932FDWDE, 6933FD, JR140DWB, JR140DWBE, JR140DWD, ML140 (Flashlight) ML141 (Flashlight), ML142 (Flashlight), ML143(Flashlight), UB140D, UB140DWA UB140DWB,6934FD, 6934FDWDE, 6935FD, 6935FDWDE, 6935FDWDEX, 8280DWAE, 8433D 8433DWAE, 8433DWDE, 8433DWFE, 8434DWFE, BMR100, JR140D, JR140DWA, JR140DWAE"

PRODUCT INFORMATION

ENC-MA1420 14.4V 1.5Ah/2Ah Ni-CD Power Tool Battery 1420 PA14 for Makita 6280DWAE 6280DWPE 6333D 6336D 1051D 4333D 6935FD | Enpower

ENC-MA1420 14.4V 1.5Ah / 2Ah Ni-CD Power Tool Replacement Battery 1420 / PA14 for Makita 6280DWAE / 6280DWPE / 6333D / 6336D / 1051D / 4333D / 6935FD Drills Drivers Saws and Job Site Lights

Enpower ENC-MA1420 high-drain Ni-CD (Nickel-Cadmium) rechargeable battery engineered as a faithful OEM-spec replacement for the Makita 1420 / PA14 battery family. One housing covers 79 Makita tools in a single SKU: the 6280 / 6281 / 6333 / 6336 / 6337 / 6339 driver-drill fleet, the 6228 / 6233 / 6236 / 6237 heavy-duty series, the 1051D / 4033D / 4332D / 4333D / 5094DWD / 5630DWD saw and multitool lines, the 6932FD / 6933FD / 6934FD / 6935FD impact drivers and wrenches, the 8280DWAE / 8433D / 8433DWAE / 8433DWDE / 8433DWFE / 8434DWFE hammer drills, plus the ML140 / ML141 / ML142 / ML143 flashlights, UB140 worklights, BMR100 job site radio and JR140 radio line. Offered in two capacity tiers - 1.5Ah (21.6Wh) and 2Ah (28.8Wh) - at a stable 14.4V nominal voltage, the pack is built around premium high quality long-cycle Ni-CD cells, a chemistry prized on the jobsite for its tolerance of deep discharge cycles, dependable high-current output in cold weather and long service life under daily charge-and-go use. The 9.42*9.34*10.91 cm housing faithfully follows the original battery dimensions and latch geometry for a plug-and-play fit with no modification, and the red high impact ABS/PC composite shell stands up to jobsite drops, dust and moisture. For fleets still running these proven Makita platforms, one ENC-MA1420 standard means unified procurement, simplified battery rotation and lower total cost of ownership. Manufactured in Guangdong China with 12-month full quality warranty.

Basic Product Information

Brand
Enpower
Model No.
ENC-MA1420
Applicable Equipment
Power Tool (Cordless)
Matching OEM Models
1420 / PA14
Battery Type
Ni-CD (Nickel-Cadmium)
Nominal Voltage
14.4V
Nominal Capacity
1.5Ah (21.6Wh) / 2Ah (28.8Wh)
Overall Size (H*W*D)
9.42*9.34*10.91 cm
Weight
750g
Color
Red
Shell Material
High Impact ABS/PC
Cell Quality
High Quality Long Cycle Ni-CD Cells
Application
Power Tools / Home Appliances / Consumer Electronics
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
OEM / ODM
Available
Warranty Period
12 Months

Compatible Models

The ENC-MA1420 replacement battery is fully compatible with the following Makita 1420 / PA14 power tool and job site light models:

6280DWAE 6280DWPE 6281D 6333D 6333DA 6333DWA 6333DWAE 6333DWBE 6336D 6336DWA 6336DWAE 6336DWB 6336DWBE 6336DWDE 6337D 1051D 1051DWA 1051DWAE 1051DWD 1051DWDE 1051DWF 1051DWFE 1051DZ 4033D 4033DZ 4332D 4333D 4333DWAE 4333DWD 4333DWDE 4333DZ 5094DWD 5630DWD 6228DW 6228DWAE 6228DWBE 6228DWE 6233D 6233DWAE 6233DWBE 6236DWBE 6236DWDE 6237D 6237DWDE 6337DWAE 6337DWDE 6337DWDESP 6337DWFE 6339DWDE 6339DWFE 6381D 6932FD 6932FDWDE 6933FD JR140DWB JR140DWBE JR140DWD ML140 ML141 ML142 ML143 UB140D UB140DWA UB140DWB 6934FD 6934FDWDE 6935FD 6935FDWDE 6935FDWDEX 8280DWAE 8433D 8433DWAE 8433DWDE 8433DWFE 8434DWFE BMR100 JR140D JR140DWA JR140DWAE

Product Description & Core Advantages

✅ 1.5Ah / 2Ah Capacity Options for the Makita 14.4V Fleet
Direct replacement for the Makita OEM battery 1420 / PA14, purpose-built to cover 79 tools in a single housing - driver-drills (6280 / 6333 / 6336 / 6337 / 6339), heavy-duty series (6228 / 6233 / 6236 / 6237), saws and multitools (1051D / 4033D / 4332D / 4333D / 5094DWD / 5630DWD), impact drivers and wrenches (6932FD / 6933FD / 6934FD / 6935FD), hammer drills (8280DWAE / 8433 / 8434) and the ML / UB / JR / BMR100 job site lights and radios. Choose 1.5Ah (21.6Wh) for cost-efficient everyday rotation or 2Ah (28.8Wh) for longer runtime on demanding shifts.

✅ Rugged Ni-CD Chemistry Built for Hard Jobsite Service
Premium high quality long-cycle Ni-CD cells deliver stable 14.4V output with the sustained high-current discharge that drilling, driving and sawing demand. Nickel-Cadmium is exceptionally tolerant of deep discharge cycles and hard daily charge-and-go handling, keeps its output dependable in cold weather conditions, and offers a long cycle life - with any memory effect easily managed through an occasional full discharge before recharging.

✅ Faithful OEM-Spec Fit, Rugged Red Housing
The 9.42*9.34*10.91 cm housing faithfully follows the original battery dimensions and latch geometry for a true plug-and-play fit - slide the pack on, hear the latch click, and the tool is ready to work. The red high impact ABS/PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

  • ⭐ Makita 1420 / PA14 Replacement - Matches the original battery family for a drop-in fit across all 79 listed models without modification
  • ⭐ Two Capacity Tiers - 1.5Ah (21.6Wh) and 2Ah (28.8Wh) options share the same housing, so mixed fleets can standardize on one battery form factor
  • ⭐ High-Drain Ni-CD Cell Design - Sustained high-current delivery for demanding applications with no significant power sag under load
  • ⭐ Cold Weather & Deep Discharge Tough - Ni-CD chemistry keeps working where lesser cells fade: low temperatures, deep cycles and rough jobsite handling
  • ⭐ Rugged Jobsite Housing & Warranty - Red high impact ABS/PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

Related Power Tool Batteries

Safety Cautions

  • ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause alkaline electrolyte leakage, overheating or fire. If electrolyte contact occurs, flush the affected area with clean water immediately and seek medical attention. Stop using the battery right away if you notice unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

  • ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit - a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods.

  • ⚠ Only charge with a Ni-CD compatible charger designed for the Makita 1420 / PA14 battery family. Do NOT use a Li-ion charger with CC/CV logic on this Ni-CD battery - the charging logic is completely different and may cause under-charge, overheating or permanent damage. Chargers designed only for Ni-MH packs should also be avoided unless they explicitly support Ni-CD - always check the charger label before use.

  • ⚠ To avoid memory effect, let the pack run down fully before recharging every few cycles instead of topping it up from partial discharge. Let the pack cool down after heavy use before recharging, and store it in a cool dry place. This battery contains cadmium: spent packs MUST be returned to an authorized battery recycling collection point in compliance with local regulations - never dispose of them in household waste.

Frequently Asked Questions

Q1: Is ENC-MA1420 fully compatible with OEM 1420 / PA14 and all the listed Makita tools?-
A: Yes. ENC-MA1420 is a faithful OEM-spec replacement for the Makita 1420 / PA14 battery family (1420 and PA14 are both OEM designations within the same 14.4V pod battery line), with identical nominal voltage and a housing that follows the original dimensions and latch geometry for a plug-and-play fit. It works with all 79 models listed in the compatibility table above - including the 6280 / 6333 / 6336 / 6337 driver-drills, the 6228 / 6233 / 6236 / 6237 heavy-duty series, the 1051D / 4033D / 4332D / 4333D / 5094DWD / 5630DWD saw and multitool lines, the 6932FD / 6933FD / 6934FD / 6935FD impact drivers, the 8280DWAE / 8433 / 8434 hammer drills, and the ML140-143 / UB140 / JR140 / BMR100 lights and radios. No modification required.
Q2: What is the difference between the 1.5Ah and 2Ah versions of ENC-MA1420?+
A: Both versions share the same 14.4V housing, the same 1420 / PA14 fitment and the same 750g weight class - the only difference is runtime. The 1.5Ah (21.6Wh) version is the cost-efficient choice for everyday drilling and driving with frequent charger access; the 2Ah (28.8Wh) version delivers roughly 33% more runtime per charge, which pays off on sawing, fastening and long shifts away from the charger. You can mix both tiers in one fleet freely, since they fit and charge identically.
Q3: Can I charge ENC-MA1420 on a Li-ion charger or my old Ni-MH charger?+
A: No Li-ion chargers. This is a Ni-CD pack and requires a charger designed for Ni-CD batteries in the Makita 1420 / PA14 family - for example your existing Makita Ni-CD charger. Li-ion chargers use CC/CV (constant current / constant voltage) logic with a 4.2V-per-cell cutoff, which is completely different and may cause under-charge, overheating or permanent damage on Ni-CD cells. Chargers designed only for Ni-MH packs should also be avoided unless the label explicitly states Ni-CD support - always check the charger markings before use.
Q4: Will ENC-MA1420 also fit Makita 7.2V / 9.6V / 18V tools, other brands, or two-way radios?+
A: No. ENC-MA1420 (replacement for OEM 1420 / PA14) is designed ONLY for the 14.4V Makita tools listed in the compatibility table above. Other voltage platforms - 7.2V / 9.6V / 12V / 18V Makita families - use physically different packs with different cell counts, housings and latches that are NOT interchangeable. Other power tool brands (Bosch, DeWalt, Hitachi/HiKOKI, Milwaukee, Ryobi and others) use their own proprietary pack designs. The same applies across product categories: two-way radio batteries (Motorola NTN / HNN / PMNN / NNTN, ICOM BP-, KENWOOD KNB-, Vertex FNB-, Hytera BH/BL series) have completely different housings, contacts and voltages and must never be used in power tools. Always match the OEM battery part number and the voltage printed on your tool before ordering.
Q5: What is the difference between ENC-MA1420 (Ni-CD) and the Ni-MH version for the same platform?+
A: Both are drop-in replacements for the same Makita 1420 / PA14 platform and share the same housing. ENC-MA1420 uses Ni-CD (Nickel-Cadmium) cells in 1.5Ah / 2Ah tiers - exceptionally rugged, deep-discharge tolerant and dependable in cold weather, at a friendly cost per pack. The Ni-MH version (ENH-MA1420) uses Nickel-Metal Hydride cells in a higher 3Ah (43.2Wh) capacity, is cadmium-free and has no memory effect, at a higher price point. The two chemistries are NOT interchangeable on the charger side: charge each pack only on a charger that explicitly supports its chemistry, and dispose of spent Ni-CD packs at authorized recycling points due to their cadmium content.

Contact Us & Send Inquiry