📞 Tel:+86-750-3857665

Email:sales@enpowertec.com

ENC-FNB41 radio rechargeable battery

enpower P/N:ENC-FNB41

oem battery:FNB-41

Part Number:

Manufacturer (OEM):

oem model:

chemistry:Ni-CD

voltge:9.6V

capacity:600mAh

Voltage/Capacity:

Demension (H*W*D)(cm):9.91*5.66*2.56

compatible radio:FT-10/41/50

Description:

compatible models:

PRODUCT INFORMATION

ENC-FNB41 9.6V 600mAh Ni-CD Two-way Radio Battery FNB-41 for Yaesu FT-10R FT-41R FT-50R Walkie Talkie | Enpower

ENC-FNB41 9.6V 600mAh Ni-CD Rechargeable Battery for Yaesu FT-10R / FT-41R / FT-50R Two-way Radio

Enpower ENC-FNB41 heavy-duty nickel-cadmium rechargeable battery engineered as a faithful OEM-spec replacement power supply for Yaesu/Vertex Standard OEM battery FNB-41. Purpose-built for the FT-10R, FT-41R and FT-50R compact amateur handheld radios, this pack runs on the higher 9.6V nominal platform (8-cell configuration) that delivers strong transmit power headroom and crisp audio output — the classic power source for ham radio operators, SAR volunteers, outdoor adventurers and emergency communication teams. Built around premium high quality long-cycle Ni-CD cells with stable 9.6V nominal voltage and a dependable 600mAh capacity, a high impact ABS/PC composite shell and brass golden plated low-resistance contacts. The 9.91*5.66*2.56cm form factor faithfully follows the original battery dimensions, preserving the radio's balance and on-person carry comfort. Ni-CD chemistry delivers proven tolerance to fast charging and deep discharge, dependable -20 degrees C cold-weather performance on winter expeditions and the lowest cost per cycle — the rugged economical choice for this classic handheld family. Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity. Manufactured in Guangdong China with 12-month full quality warranty.

Basic Product Information

Brand
Enpower
Model No.
ENC-FNB41
Applicable Equipment
Two-way Radio / Walkie Talkie
Matching OEM Models
FNB-41
Battery Type
Ni-CD (Nickel-Cadmium)
Nominal Voltage
9.6V
Nominal Capacity
600mAh
Overall Size (H*W*D)
9.91*5.66*2.56 cm
Color
Black
Shell Material
High Impact ABS/PC
Contact Material
Brass Golden Plated
Cell Quality
High Quality Long Cycle Ni-CD Cells
Protective Function
Short-Circuit Protection + Over-Temperature Protection + Charging Temperature Sensor + Reverse Polarity Protection
Application
Consumer Electronics / Two-way Radio
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
OEM / ODM
Available
Warranty Period
12 Months

Compatible Radio Models

The ENC-FNB41 replacement battery is fully compatible with the following Yaesu two-way radio models:

FT-10R FT-41R FT-50R

Product Description & Core Advantages

✅ 9.6V High-Platform Power for FT-10R / FT-41R / FT-50R
Direct replacement for Yaesu/Vertex Standard OEM battery FNB-41, purpose-built for the FT-10R, FT-41R and FT-50R compact amateur handhelds. The 9.6V eight-cell platform gives these radios strong transmit headroom and crisp audio output, while the 9.91*5.66*2.56cm housing faithfully follows the original battery dimensions for a plug-and-play fit, no modification required. Keep your classic FT handheld fleet running on one single battery standard for unified procurement and management.

✅ Proven Ni-CD Economy and Cold-Weather Reliability
Premium high quality long-cycle Ni-CD cells deliver stable 9.6V output and a dependable 600mAh capacity — enough for 3-5 hours of operation under standard duty cycles. Ni-CD chemistry is the classic field-economics choice: it tolerates fast charging and deep discharge, performs reliably down to -20 degrees C on winter expeditions and cold storage sites, and offers the lowest cost per charge cycle — ideal for ham operators, SAR volunteers and emergency communication teams who need rugged, predictable power.

✅ Full Protection Suite & Zero Charger Investment
Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity — complete safety for daily operations. Robust high-impact ABS/PC composite housing and brass golden plated low-resistance contacts — anti-drop, dustproof and moisture resistant for harsh field conditions. Works with your existing Yaesu Ni-CD chargers (negative delta-V logic) — no new charging infrastructure required.

  • ⭐ OEM FNB-41 Replacement — Faithfully matches original dimensions (9.91*5.66*2.56cm), drop-in fit for FT-10R / FT-41R / FT-50R without modification
  • ⭐ 9.6V Eight-Cell Platform — Higher nominal voltage delivers strong transmit power headroom and crisp audio output for demanding field communication
  • ⭐ Cold-Weather & Abuse Tolerance — Reliable -20 degrees C performance plus proven fast-charge and deep-discharge tolerance for harsh field conditions
  • ⭐ 4-Layer Safety Protection — Short-circuit / over-temperature / charging temperature sensor / reverse polarity protection integrated for daily reliability
  • ⭐ Industrial Craftsmanship & Warranty — Brass golden plated contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

Related Two-way Radio Batteries

Safety Cautions

  • ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice electrolyte leakage, unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

  • ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

  • ⚠ Only charge with a Ni-CD compatible charger using negative delta-V charging logic — including your existing Yaesu charger for FNB-41-type packs. Do NOT use a Li-ion CC/CV charger on this Ni-CD battery — the charging logic is completely different and may cause over-charge, overheating or permanent damage.

  • ⚠ This product contains cadmium. Dispose of spent packs only at an authorized battery recycling collection point in compliance with local regulations on nickel-cadmium battery handling — do not put them in household waste or incinerate.

Frequently Asked Questions

Q1: Is ENC-FNB41 fully compatible with OEM FNB-41 and my FT-10R / FT-41R / FT-50R radios?-
A: Yes. ENC-FNB41 is a faithful OEM replacement for Yaesu/Vertex Standard FNB-41, with identical 9.91*5.66*2.56cm housing dimensions and a plug-and-play fit for the FT-10R, FT-41R and FT-50R amateur handhelds. No modification required, and your existing Ni-CD charger keeps working.
Q2: What is the difference between this ENC-FNB41 (Ni-CD) and the ENH-FNB41 (Ni-MH) pack carrying the same OEM number?+
A: Both packs share the OEM platform FNB-41 (9.6V eight-cell, identical 9.91*5.66*2.56cm housing), but they serve different radio lines and different chemistries. ENC-FNB41 is a Ni-CD pack (600mAh, approx. 3-5 hours per charge) built for the FT-10R / FT-41R / FT-50R amateur handhelds — lowest cost per cycle, proven -20 degrees C performance and strong fast-charge / deep-discharge tolerance. ENH-FNB41 is a Ni-MH pack (1100mAh, approx. 6-8 hours per charge) built for the VX-10V / VX-10U business handhelds — cadmium-free with nearly double the capacity on the same negative delta-V charging logic. Both charge on Ni-CD/Ni-MH negative delta-V chargers, but always pick the pack that matches your radio model and chemistry requirement.
Q3: How do I deal with the memory effect on this Ni-CD battery?+
A: Ni-CD chemistry can develop a mild memory effect if it is repeatedly recharged after only partial discharge. To keep the full capacity available, run a refresh cycle every 20-30 charge cycles: use the radio until it shuts down on a low-battery alert (or use a charger with a discharge/refresh function), then recharge fully with a negative delta-V Ni-CD charger. Operators who follow this simple routine typically maintain rated capacity well beyond the warranty period. Avoid topping up after every short use — complete discharge-charge cycles are the key.
Q4: Will ENC-FNB41 also fit VX-10V, VX-10U, VX-5R, VX-350, EVX-530, Motorola, ICOM or other radio models?+
A: No. ENC-FNB41 (replacement for OEM FNB-41) is designed ONLY for the Yaesu FT-10R / FT-41R / FT-50R listed above. Other Vertex Standard / Yaesu radios use different battery families: the VX-10V / VX-10U uses the Ni-MH ENH-FNB41 pack (same FNB-41 platform, different chemistry), the VX-110 through VX-246 / VX-400-428 broad family uses FNB-V57 (Ni-CD), FNB-V83 (Ni-MH) or FNB-V67 (Li-ion), the VX-5R / VX-6R / VX-7R series uses FNB-V80LI, the VX-820 series uses FNB-V87LI, the VX-350 series uses FNB-V95LI, the VX-230 series uses FNB-V104LI or FNB-V106, the VX-450 series uses FNB-V113LI, the EVX-530 DMR series uses FNB-V134LI, and the VX-260 series uses FNB-V131 — housing dimensions, voltage platform, contact arrangement and locking mechanism are NOT interchangeable across these families. The same applies across brands: Motorola radios use their own NTN/NNTN/PMNN/HNN families, ICOM radios use the BP- series, KENWOOD radios use the KNB- series, and Hytera radios use the BH/BL series — Vertex/Yaesu packs do not fit Motorola, ICOM, KENWOOD or Hytera radios and vice versa. Always check the OEM battery part number printed on your existing battery before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.

Contact Us & Send Inquiry