ENH-FNB12 12V 1100mAh Ni-MH Two-way Radio Battery FNB-12 for Vertex Standard FTH-2009 FTH-2010 FTH-7010 FTH-2070 Walkie Talkie | Enpower
ENH-FNB12 12V 1100mAh Ni-MH Rechargeable Battery for Vertex Standard FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070 Two-way Radio
Enpower ENH-FNB12 high-performance nickel-metal hydride rechargeable battery engineered as a faithful OEM-spec replacement power supply for Vertex Standard OEM battery FNB-12. Purpose-built for the FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070 professional radios, this pack runs on a higher 12V nominal platform (10-cell configuration) that delivers maximum transmit power headroom, stronger signal penetration and crisp audio output for demanding fleet communication in construction, security, warehousing, manufacturing, logistics, property management and event operations. Built around premium high quality long-cycle Ni-MH cells with stable 12V nominal voltage and a full 1100mAh capacity, a high impact ABS/PC composite shell and brass golden plated low-resistance contacts. The 8.19*5.50*3.24cm form factor faithfully follows the original battery dimensions, preserving the radio's balance and on-person carry comfort. Ni-MH chemistry is cadmium-free and memory-free, supports frequent opportunity charging without capacity loss, and tolerates deep discharge — an environmentally responsible workhorse for daily fleet rotation. Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity, and the pack works with your existing Ni-MH chargers (negative delta-V logic) with zero new charging infrastructure. Manufactured in Guangdong China with 12-month full quality warranty.
Basic Product Information
Applicable Equipment
Two-way Radio / Walkie Talkie
Matching OEM Models
FNB-12
Battery Type
Ni-MH (Nickel-Metal Hydride)
Overall Size (H*W*D)
8.19*5.50*3.24 cm
Shell Material
High Impact ABS/PC
Contact Material
Brass Golden Plated
Cell Quality
High Quality Long Cycle Ni-MH Cells
Protective Function
Short-Circuit Protection + Over-Temperature Protection + Charging Temperature Sensor + Reverse Polarity Protection
Application
Consumer Electronics / Two-way Radio
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
Warranty Period
12 Months
Compatible Radio Models
The ENH-FNB12 replacement battery is fully compatible with the following Vertex Standard two-way radio models:
FTH-2009
FTH-2010
FTH-7010
FTH-2070
Product Description & Core Advantages
✅ 12V High-Platform Power for FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070
Direct replacement for Vertex Standard OEM battery FNB-12, purpose-built for the FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070 professional radios. The 12V ten-cell platform gives these radios maximum transmit headroom, stronger signal penetration and crisper audio than the common 7.2V packs — while the 8.19*5.50*3.24cm housing faithfully follows the original battery dimensions for a plug-and-play fit, no modification required. Keep your fleet running on one single battery standard for unified procurement and management.
✅ 1100mAh Ni-MH for Reliable Daily Duty
Premium high quality long-cycle Ni-MH cells deliver stable 12V output and a dependable 1100mAh capacity — enough for 7-9 hours of operation under standard duty cycles. Ni-MH chemistry is cadmium-free and memory-free, supports frequent opportunity charging without capacity loss, and tolerates deep discharge — an economical, environmentally responsible workhorse for daily shifts and spare-battery rotation programs.
✅ Full Protection Suite & Zero Charger Investment
Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity — complete safety for daily operations. Robust high-impact ABS/PC composite housing and brass golden plated low-resistance contacts — anti-drop, dustproof and moisture resistant for harsh jobsite conditions. Works with your existing Vertex Standard Ni-MH chargers (negative delta-V logic) — no new charging infrastructure required.
- ⭐ OEM FNB-12 Replacement — Faithfully matches original dimensions (8.19*5.50*3.24cm), drop-in fit for FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070 without modification
- ⭐ 12V Ten-Cell Platform — Highest nominal voltage in the Vertex handheld lineup delivers maximum transmit power headroom, stronger penetration and crisp audio output
- ⭐ 1100mAh Daily Duty Runtime — 7-9 hours of operation under standard duty cycles, sized for daily shifts and spare-battery rotation
- ⭐ Cadmium-Free & Memory-Free Ni-MH — No memory effect, recharge at any state of charge, environmentally responsible chemistry for fleet-wide deployment
- ⭐ Industrial Craftsmanship & Warranty — Brass golden plated contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty
Related Two-way Radio Batteries
Safety Cautions
⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.
⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.
⚠ Only charge with a Ni-MH compatible charger using negative delta-V charging logic — including your existing Vertex Standard charger for FNB-12-type packs. Do NOT use a Li-ion CC/CV charger on this Ni-MH battery — the charging logic is completely different and may cause over-charge, overheating or permanent damage.
⚠ For long-term storage, keep the pack fully charged in a cool dry place and recharge it every 2-3 months to prevent deep self-discharge. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations — do not put them in household waste.
Frequently Asked Questions
Q1: Is ENH-FNB12 fully compatible with OEM FNB-12 and my FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070 radios?-
A: Yes. ENH-FNB12 is a faithful OEM replacement for Vertex Standard FNB-12, with identical 8.19*5.50*3.24cm housing dimensions and a plug-and-play fit for the FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070 radios. No modification required, and your existing Ni-MH charger keeps working.
Q2: Why does this battery use 12V instead of the 7.2V or 9.6V used by most Vertex packs? Can I use a 7.2V or 9.6V pack on my radio?+
A: These radios were designed around a ten-cell 12V platform (OEM FNB-12) that gives the radio maximum transmit power headroom, stronger signal penetration and crisper audio — that is why this pack is 12V. The 7.2V packs used by the broad Vertex family (FNB-V57 / FNB-V83 / FNB-V67) and the 9.6V pack used by the VX-10 series (FNB-41) serve different radio generations with different housing dimensions, contact arrangement and voltage requirements — they are NOT interchangeable with the FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070. Always replace with the same OEM platform: use ENH-FNB12 (12V) for these radios.
Q3: Can I use a Li-ion CC/CV charger or a generic charger on this Ni-MH battery?+
A: No. Ni-MH cells require a negative delta-V (or timer-based) charging logic, while Li-ion chargers use CC/CV (constant current / constant voltage) cutoff — the two logics are completely different. Charging this Ni-MH pack on a Li-ion charger may cause over-charge, overheating or permanent damage. Use only a Ni-MH compatible charger such as your existing Vertex Standard charger for FNB-12-type packs.
Q4: Will ENH-FNB12 also fit VX-10, VX-5R, VX-820, VX-350, VX-450, EVX-530, Motorola, ICOM or other radio models?+
A: No. ENH-FNB12 (replacement for OEM FNB-12) is designed ONLY for the Vertex Standard FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070 listed above. Other Vertex Standard radios use different battery families: the FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008 line pairs with the Ni-CD version ENC-FNB12, the VX-110 through VX-246 / VX-400-428 broad family uses FNB-V57 (Ni-CD), FNB-V83 (Ni-MH) or FNB-V67 (Li-ion), the VX-10V / VX-10U series uses FNB-41 (9.6V), the VX-5R / VX-6R / VX-7R series uses FNB-V80LI, the VX-820 / VX-821 / VX-920 / VX-921 series uses FNB-V87LI, the VX-350 / VX-351 / VX-354 series uses FNB-V95LI, the VX-230 / VX-231 / VX-228 series uses FNB-V104LI (Li-ion) or FNB-V106 (Ni-MH), the VX-450 / VX-451 / VX-454 / VX-459 series uses FNB-V113LI, the EVX-530 DMR series uses FNB-V134LI, and the VX-260 series uses FNB-V131 — housing dimensions, voltage platform, contact arrangement and locking mechanism are NOT interchangeable across these families. The same applies across brands: Motorola radios use their own NTN/NNTN/PMNN/HNN families, ICOM radios use the BP- series, KENWOOD radios use the KNB- series, and Hytera radios use the BH/BL series — Vertex/Yaesu packs do not fit Motorola, ICOM, KENWOOD or Hytera radios and vice versa. Always check the OEM battery part number printed on your existing battery before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.
Contact Us & Send Inquiry