📞 Tel:+86-750-3857665

Email:sales@enpowertec.com

ENH-FNB83 two way radio battery compatible with FNB-V83

enpower P/N:ENH-FNB83

oem battery:FNB-V83

Part Number:

Manufacturer (OEM):

oem model:

chemistry:Ni-MH

voltge:7.2V

capacity:1800mAh

Voltage/Capacity:

Demension (H*W*D)(cm):9.51*5.78*1.63

compatible radio:"VX-160 VX-168 FT-60R VX-110 VX-120 VX-127 VX-130 VX-131 VX-132 VX-150 VX-170 VX-177 VX-180 VX180E VX-210A VX-218 VX-400 VX-410 VX-418 VX-420 VX-428 HX270 HX370S HX500S HX600S VX-210 VX-800V/U VX-900 FT-60R FT-60 VXA-200 VX-A300 VX-146 VX-246 A400 A410 A420 A800"

Description:

compatible models:

PRODUCT INFORMATION

ENH-FNB83 7.2V 1800mAh Ni-MH Two-way Radio Battery FNB-V83 for Vertex Standard VX-160 VX-170 VX-410 FT-60R Walkie Talkie | Enpower

ENH-FNB83 7.2V 1800mAh Ni-MH Rechargeable Battery for Vertex Standard VX-160 / VX-170 / VX-410 / FT-60R Two-way Radio

Enpower ENH-FNB83 high-performance nickel-metal hydride rechargeable battery engineered as a faithful OEM-spec replacement power supply for Vertex Standard OEM battery FNB-V83. With an exceptionally broad compatibility list — 30+ Vertex Standard and Yaesu/Standard Horizon handhelds including VX-110/120/127/130/131/132/146/150/160/168/170/177/180/180E/210/210A/218/246, the VX-400/410/418/420/428 business series, VX-800V/U and VX-900, the FT-60R amateur handheld, the VXA-200/VXA-300 aviation portables and the HX270/HX370S/HX500S/HX600S marine handhelds — this is the true workhorse pack for mixed legacy fleets in construction, security, warehousing, manufacturing, logistics, property management and event operations. Built around premium high quality long-cycle Ni-MH cells with stable 7.2V nominal voltage and a full 1800mAh capacity, a high impact ABS/PC composite shell and brass golden plated low-resistance contacts. The 9.51*5.78*1.63cm form factor faithfully follows the original battery dimensions, preserving the radio's balance and on-person carry comfort. Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity, and the pack works with your existing Ni-MH chargers (negative delta-V logic) with zero new charging infrastructure. Cadmium-free Ni-MH chemistry is the environmentally responsible choice for daily fleet rotation. Manufactured in Guangdong China with 12-month full quality warranty.

Basic Product Information

Brand
Enpower
Model No.
ENH-FNB83
Applicable Equipment
Two-way Radio / Walkie Talkie
Matching OEM Models
FNB-V83
Battery Type
Ni-MH (Nickel-Metal Hydride)
Nominal Voltage
7.2V
Nominal Capacity
1800mAh
Overall Size (H*W*D)
9.51*5.78*1.63 cm
Color
Black
Shell Material
High Impact ABS/PC
Contact Material
Brass Golden Plated
Cell Quality
High Quality Long Cycle Ni-MH Cells
Protective Function
Short-Circuit Protection + Over-Temperature Protection + Charging Temperature Sensor + Reverse Polarity Protection
Application
Consumer Electronics / Two-way Radio
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
OEM / ODM
Available
Warranty Period
12 Months

Compatible Radio Models

The ENH-FNB83 replacement battery is fully compatible with the following Vertex Standard / Yaesu two-way radio models (30+ models, one pack for the whole fleet):

VX-110 VX-120 VX-127 VX-130 VX-131 VX-132 VX-146 VX-150 VX-160 VX-168 VX-170 VX-177 VX-180 VX-180E VX-210 VX-210A VX-218 VX-246 VX-400 VX-410 VX-418 VX-420 VX-428 VX-800V/U VX-900 VXA-200 VXA-300 FT-60R HX270 HX370S HX500S HX600S A400 A410 A420 A800

Product Description & Core Advantages

✅ One Pack for 30+ Vertex Standard / Yaesu Handhelds
Direct replacement for Vertex Standard OEM battery FNB-V83, purpose-built for an exceptionally broad family — VX-110 through VX-246 consumer/business portables, the VX-400/410/418/420/428 business series, VX-800V/U and VX-900, the FT-60R amateur handheld, VXA-200/VXA-300 aviation portables and HX270/HX370S/HX500S/HX600S marine handhelds. The 9.51*5.78*1.63cm housing faithfully follows the original battery dimensions — plug-and-play fit, no modification required. One battery standard covering the entire mixed legacy fleet for unified procurement and management.

✅ 1800mAh Ni-MH for Reliable Daily Duty
Premium high quality long-cycle Ni-MH cells deliver stable 7.2V output and a full 1800mAh capacity — enough for 8-10 hours of operation under standard duty cycles, comfortably covering full shifts on construction sites, security patrols and warehouse floors. Ni-MH chemistry has no memory effect and no cadmium, supports frequent opportunity charging without capacity loss, and tolerates deep discharge and fast charging — an economical, environmentally responsible workhorse for back-to-back shifts and spare-battery rotation programs.

✅ Full Protection Suite & Zero Charger Investment
Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity — complete safety for daily operations. Robust high-impact ABS/PC composite housing and brass golden plated low-resistance contacts — anti-drop, dustproof and moisture resistant for harsh jobsite conditions. Works with your existing Vertex Standard Ni-MH chargers (negative delta-V logic) — no new charging infrastructure required.

  • ⭐ OEM FNB-V83 Replacement — Faithfully matches original dimensions (9.51*5.78*1.63cm), drop-in fit for 30+ Vertex Standard / Yaesu handheld models without modification
  • ⭐ 1800mAh Full-Shift Runtime — 8-10 hours of operation under standard duty cycles, keeping crews connected through daily shifts and spare-battery rotation
  • ⭐ 4-Layer Safety Protection — Short-circuit / over-temperature / charging temperature sensor / reverse polarity protection integrated for daily reliability
  • ⭐ Cadmium-Free & Memory-Free Ni-MH — No memory effect, recharge at any state of charge, environmentally responsible chemistry for fleet-wide deployment
  • ⭐ Industrial Craftsmanship & Warranty — Brass golden plated contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

Related Two-way Radio Batteries

Safety Cautions

  • ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

  • ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

  • ⚠ Only charge with a Ni-MH compatible charger using negative delta-V charging logic — including your existing Vertex Standard charger for FNB-V83-type packs. Do NOT use a Li-ion CC/CV 8.4V charger on this Ni-MH battery — the charging logic is completely different and may cause over-charge, overheating or permanent damage.

  • ⚠ For long-term storage, keep the pack fully charged in a cool dry place and recharge it every 2-3 months to prevent deep self-discharge. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations — do not put them in household waste.

Frequently Asked Questions

Q1: Is ENH-FNB83 fully compatible with OEM FNB-V83 and its long list of radios?-
A: Yes. ENH-FNB83 is a faithful OEM replacement for Vertex Standard FNB-V83, with identical 9.51*5.78*1.63cm housing dimensions and a plug-and-play fit for 30+ Vertex Standard / Yaesu handhelds — the VX-110 through VX-246 consumer/business portables, VX-400/410/418/420/428 business series, VX-800V/U, VX-900, FT-60R amateur handheld, VXA-200/VXA-300 aviation portables, HX270/HX370S/HX500S/HX600S marine handhelds and A400/A410/A420/A800. No modification required, and your existing Ni-MH charger keeps working.
Q2: What is the difference between ENH-FNB83 (Ni-MH) and the ENL-FNB67 (Li-ion) pack for the same radios?+
A: Both packs serve the same broad Vertex Standard compatibility family, but they are different chemistries and are NOT interchangeable on the charger. ENH-FNB83 is a Ni-MH pack (7.2V, 1800mAh, approx. 8-10 hours per charge) that works with your existing negative delta-V Ni-MH chargers — the economical, cadmium-free choice for daily rotation on existing Ni-MH charging infrastructure. ENL-FNB67 is a Li-ion pack (7.4V, 2600mAh, approx. 12-14 hours per charge) that requires a CC/CV 8.4V Li-ion charger and offers higher capacity with lower self-discharge. Choose by your current charging infrastructure: do not charge a Ni-MH pack on a Li-ion charger or vice versa.
Q3: Can I use a Li-ion CC/CV 8.4V charger or a generic charger on this Ni-MH battery?+
A: No. Ni-MH cells require a negative delta-V (or timer-based) charging logic, while Li-ion chargers use CC/CV (constant current / constant voltage) 8.4V cutoff — the two logics are completely different. Charging this Ni-MH pack on a Li-ion charger may cause over-charge, overheating or permanent damage. Use only a Ni-MH compatible charger such as your existing Vertex Standard charger for FNB-V83-type packs.
Q4: Will ENH-FNB83 also fit VX-5R, VX-820, VX-350, VX-450, EVX-530, Motorola, ICOM or other radio models?+
A: No. ENH-FNB83 (replacement for OEM FNB-V83) is designed ONLY for the Vertex Standard / Yaesu models listed above. Other Vertex Standard radios use different battery families: the VX-5R / VX-6R / VX-7R series uses FNB-V80LI, the VX-820 / VX-821 / VX-920 / VX-921 series uses FNB-V87LI, the VX-350 / VX-351 / VX-354 series uses FNB-V95LI, the VX-230 / VX-231 / VX-228 series uses FNB-V104LI (Li-ion) or FNB-V106 (Ni-MH), the VX-450 / VX-451 / VX-454 / VX-459 series uses FNB-V113LI, the EVX-530 DMR series uses FNB-V134LI, and the VX-260 series uses FNB-V131 — housing dimensions, voltage platform, contact arrangement and locking mechanism are NOT interchangeable across these families. The same applies across brands: Motorola radios use their own NTN/NNTN/PMNN/HNN families, ICOM radios use the BP- series, KENWOOD radios use the KNB- series, and Hytera radios use the BH/BL series — Vertex/Yaesu packs do not fit Motorola, ICOM, KENWOOD or Hytera radios and vice versa. Always check the OEM battery part number printed on your existing battery before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.

Contact Us & Send Inquiry