ENC-FNB57 7.2V 1100mAh Ni-CD Two-way Radio Battery FNB-V57 for Vertex Standard VX-160 VX-170 VX-410 FT-60R Walkie Talkie | Enpower
ENC-FNB57 7.2V 1100mAh Ni-CD Rechargeable Battery for Vertex Standard VX-160 / VX-170 / VX-410 / FT-60R Two-way Radio
Enpower ENC-FNB57 heavy-duty nickel-cadmium rechargeable battery engineered as a faithful OEM-spec replacement power supply for Vertex Standard OEM battery FNB-V57. With an exceptionally broad compatibility list — 30+ Vertex Standard and Yaesu/Standard Horizon handhelds including VX-110/120/127/130/131/132/146/150/160/168/170/177/180/180E/210/210A/218/246, the VX-400/410/418/420/428 business series, VX-800V/U and VX-900, the FT-60R amateur handheld, the VXA-200/VXA-300 aviation portables and the HX270/HX370S/HX500S/HX600S marine handhelds — this is the rugged economical workhorse pack for mixed legacy fleets in construction, security, warehousing, manufacturing, logistics, property management and event operations. Built around premium high quality long-cycle Ni-CD cells with stable 7.2V nominal voltage and a full 1100mAh capacity, a high impact ABS/PC composite shell and brass golden plated low-resistance contacts. The 9.50*5.79*1.60cm form factor faithfully follows the original battery dimensions, preserving the radio's balance and on-person carry comfort. Ni-CD chemistry delivers proven tolerance to fast charging and deep discharge, dependable -20 degrees C cold-weather performance and the lowest cost per cycle — the classic choice for large rotation pools on existing Ni-CD charging infrastructure. Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity. Manufactured in Guangdong China with 12-month full quality warranty.
Basic Product Information
Applicable Equipment
Two-way Radio / Walkie Talkie
Matching OEM Models
FNB-V57
Battery Type
Ni-CD (Nickel-Cadmium)
Overall Size (H*W*D)
9.50*5.79*1.60 cm
Shell Material
High Impact ABS/PC
Contact Material
Brass Golden Plated
Cell Quality
High Quality Long Cycle Ni-CD Cells
Protective Function
Short-Circuit Protection + Over-Temperature Protection + Charging Temperature Sensor + Reverse Polarity Protection
Application
Consumer Electronics / Two-way Radio
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
Warranty Period
12 Months
Compatible Radio Models
The ENC-FNB57 replacement battery is fully compatible with the following Vertex Standard / Yaesu two-way radio models (30+ models, one pack for the whole fleet):
VX-110
VX-120
VX-127
VX-130
VX-131
VX-132
VX-146
VX-150
VX-160
VX-168
VX-170
VX-177
VX-180
VX-180E
VX-210
VX-210A
VX-218
VX-246
VX-400
VX-410
VX-418
VX-420
VX-428
VX-800V/U
VX-900
VXA-200
VXA-300
FT-60R
HX270
HX370S
HX500S
HX600S
A400
A410
A420
A800
Product Description & Core Advantages
✅ One Pack for 30+ Vertex Standard / Yaesu Handhelds
Direct replacement for Vertex Standard OEM battery FNB-V57, purpose-built for an exceptionally broad family — VX-110 through VX-246 consumer/business portables, the VX-400/410/418/420/428 business series, VX-800V/U and VX-900, the FT-60R amateur handheld, VXA-200/VXA-300 aviation portables and HX270/HX370S/HX500S/HX600S marine handhelds. The 9.50*5.79*1.60cm housing faithfully follows the original battery dimensions — plug-and-play fit, no modification required. One battery standard covering the entire mixed legacy fleet for unified procurement and management.
✅ Proven Ni-CD Economy for Large Rotation Pools
Premium high quality long-cycle Ni-CD cells deliver stable 7.2V output and a dependable 1100mAh capacity — enough for 5-7 hours of operation under standard duty cycles. Ni-CD chemistry is the classic fleet economics choice: it tolerates fast charging and deep discharge, performs reliably down to -20 degrees C in cold storage yards and winter jobsites, and offers the lowest cost per charge cycle of any chemistry — ideal for large spare-battery rotation pools on existing Ni-CD charging infrastructure.
✅ Full Protection Suite & Zero Charger Investment
Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity — complete safety for daily operations. Robust high-impact ABS/PC composite housing and brass golden plated low-resistance contacts — anti-drop, dustproof and moisture resistant for harsh jobsite conditions. Works with your existing Vertex Standard Ni-CD chargers (negative delta-V logic) — no new charging infrastructure required.
- ⭐ OEM FNB-V57 Replacement — Faithfully matches original dimensions (9.50*5.79*1.60cm), drop-in fit for 30+ Vertex Standard / Yaesu handheld models without modification
- ⭐ 1100mAh Daily Duty Runtime — 5-7 hours of operation under standard duty cycles, sized for economical daily rotation and spare-battery pools
- ⭐ Cold-Weather & Abuse Tolerance — Reliable -20 degrees C performance plus proven fast-charge and deep-discharge tolerance for harsh jobsite conditions
- ⭐ 4-Layer Safety Protection — Short-circuit / over-temperature / charging temperature sensor / reverse polarity protection integrated for daily reliability
- ⭐ Industrial Craftsmanship & Warranty — Brass golden plated contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty
Related Two-way Radio Batteries
Safety Cautions
⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice electrolyte leakage, unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.
⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.
⚠ Only charge with a Ni-CD compatible charger using negative delta-V charging logic — including your existing Vertex Standard charger for FNB-V57-type packs. Do NOT use a Li-ion CC/CV 8.4V charger on this Ni-CD battery — the charging logic is completely different and may cause over-charge, overheating or permanent damage.
⚠ This product contains cadmium. Dispose of spent packs only at an authorized battery recycling collection point in compliance with local regulations on nickel-cadmium battery handling — do not put them in household waste or incinerate.
Frequently Asked Questions
Q1: Is ENC-FNB57 fully compatible with OEM FNB-V57 and its long list of radios?-
A: Yes. ENC-FNB57 is a faithful OEM replacement for Vertex Standard FNB-V57, with identical 9.50*5.79*1.60cm housing dimensions and a plug-and-play fit for 30+ Vertex Standard / Yaesu handhelds — the VX-110 through VX-246 consumer/business portables, VX-400/410/418/420/428 business series, VX-800V/U, VX-900, FT-60R amateur handheld, VXA-200/VXA-300 aviation portables, HX270/HX370S/HX500S/HX600S marine handhelds and A400/A410/A420/A800. No modification required, and your existing Ni-CD charger keeps working.
Q2: What is the difference between ENC-FNB57 (Ni-CD), ENH-FNB83 (Ni-MH) and ENL-FNB67 (Li-ion) for the same radios?+
A: All three packs serve the same broad Vertex Standard compatibility family, but they are different chemistries and are NOT interchangeable on the charger. ENC-FNB57 is a Ni-CD pack (7.2V, 1100mAh, approx. 5-7 hours per charge) — the lowest cost per cycle, proven -20 degrees C cold-weather performance and strong fast-charge / deep-discharge tolerance, ideal for large economical rotation pools. ENH-FNB83 is a Ni-MH pack (7.2V, 1800mAh, approx. 8-10 hours per charge) — cadmium-free with higher capacity on the same negative delta-V charging infrastructure. ENL-FNB67 is a Li-ion pack (7.4V, 2600mAh, approx. 12-14 hours per charge) — highest capacity and lowest self-discharge, but requires a dedicated CC/CV 8.4V Li-ion charger. Choose by your current charging infrastructure and budget: do not charge any of them on a charger intended for a different chemistry.
Q3: How do I deal with the memory effect on this Ni-CD battery?+
A: Ni-CD chemistry can develop a mild memory effect if it is repeatedly recharged after only partial discharge. To keep the full capacity available, run a refresh cycle every 20-30 charge cycles: use the radio until it shuts down on a low-battery alert (or use a charger with a discharge/refresh function), then recharge fully with a negative delta-V Ni-CD charger. Fleets that follow this simple routine typically maintain rated capacity well beyond the warranty period. Avoid topping up after every short use — complete discharge-charge cycles are the key.
Q4: Will ENC-FNB57 also fit VX-5R, VX-820, VX-350, VX-450, EVX-530, Motorola, ICOM or other radio models?+
A: No. ENC-FNB57 (replacement for OEM FNB-V57) is designed ONLY for the Vertex Standard / Yaesu models listed above. Other Vertex Standard radios use different battery families: the VX-5R / VX-6R / VX-7R series uses FNB-V80LI, the VX-820 / VX-821 / VX-920 / VX-921 series uses FNB-V87LI, the VX-350 / VX-351 / VX-354 series uses FNB-V95LI, the VX-230 / VX-231 / VX-228 series uses FNB-V104LI (Li-ion) or FNB-V106 (Ni-MH), the VX-450 / VX-451 / VX-454 / VX-459 series uses FNB-V113LI, the EVX-530 DMR series uses FNB-V134LI, and the VX-260 series uses FNB-V131 — housing dimensions, voltage platform, contact arrangement and locking mechanism are NOT interchangeable across these families. The same applies across brands: Motorola radios use their own NTN/NNTN/PMNN/HNN families, ICOM radios use the BP- series, KENWOOD radios use the KNB- series, and Hytera radios use the BH/BL series — Vertex/Yaesu packs do not fit Motorola, ICOM, KENWOOD or Hytera radios and vice versa. Always check the OEM battery part number printed on your existing battery before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.
Contact Us & Send Inquiry