ENH-MA1420 14.4V 3Ah Ni-MH Power Tool Replacement Battery 1420 / PA14 for Makita 6280DWAE / 6280DWPE / 6333D / 6336D / 1051D / 4333D / 6935FD Drills Drivers Saws and Job Site Lights

The ENH-MA1420 replacement battery is fully compatible with the following Makita 1420 / PA14 power tool and job site light models:

✅ 3Ah 43.2Wh High-Drain Ni-MH for the Makita 14.4V Fleet
Direct replacement for the Makita OEM battery 1420 / PA14, purpose-built to cover 79 tools in a single SKU — driver-drills (6280 / 6333 / 6336 / 6337 / 6339), heavy-duty series (6228 / 6233 / 6236 / 6237), saws and multitools (1051D / 4033D / 4332D / 4333D / 5094DWD / 5630DWD), impact drivers and wrenches (6932FD / 6933FD / 6934FD / 6935FD), hammer drills (8280DWAE / 8433 / 8434) and the ML / UB / JR / BMR100 job site lights and radios. One battery standard for your mixed Makita 14.4V fleet means unified procurement and simplified rotation.

✅ Sustained High-Current Output Under Load
Premium high quality long-cycle Ni-MH cells deliver stable 14.4V output with the sustained high-current discharge that drilling, driving and sawing demand — no significant power sag when the tool bites into the workpiece. Ni-MH chemistry is memory-manageable and cadmium-free, tolerates deep discharge cycles and hard jobsite handling, and the 3Ah 43.2Wh capacity keeps you working through extended sessions between charges.

✅ Faithful OEM-Spec Fit, Rugged Red Housing
The 9.42*9.34*10.91 cm housing faithfully follows the original battery dimensions and latch geometry for a true plug-and-play fit — slide the pack on, hear the latch click, and the tool is ready to work. The red high impact ABS/PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

• ⭐ Makita 1420 / PA14 Replacement — Matches the original battery family for a drop-in fit across all 79 listed models without modification
• ⭐ 3Ah 43.2Wh Capacity — Full 14.4V Ni-MH capacity for extended drilling, driving, cutting and fastening sessions
• ⭐ High-Drain Cell Design — Sustained high-current delivery for demanding applications with no significant power sag under load
• ⭐ 79 Tools, One SKU — Covers drills, drivers, saws, multitools, flashlights, worklights and job site radios with a single battery standard
• ⭐ Rugged Jobsite Housing & Warranty — Red high impact ABS/PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit — a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Ni-MH compatible charger designed for the Makita 1420 / PA14 battery family (negative delta-V charging logic). Do NOT use a Li-ion charger with CC/CV logic on this Ni-MH battery — the charging logic is completely different and may cause under-charge, overheating or permanent damage.

• ⚠ Let the pack cool down after heavy use before recharging, and charge in a dry area at room temperature. For long-term storage, keep the pack in a cool dry place and check it every 2-3 months. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations — do not put them in household waste.