📞 Tel:+86-750-3857665

Email:sales@enpowertec.com

ENL-DC16 vacuum cleaner batteries

enpower P/N:ENL-DC16

oem battery:DC16

Part Number:

Manufacturer (OEM):

oem model:

chemistry:Li-ion

voltge:21.6V

capacity:2.5AH 54WH

Voltage/Capacity:

Demension (H*W*D)(cm):14*0.74*0.3

compatible radio:

Description:Replacement Battery DC16 for Dyson DC16 DC16 Root 6 DC16 Animal Vacuum Cleaner Battery

compatible models:Dyson Handheld Vacuum Cleaner DC16 DC16 Root 6 DC16 Animal

PRODUCT INFORMATION

ENL-DC16 21.6V 2.5Ah 54Wh Li-ion Replacement Battery DC16 for Dyson DC16 DC16 Root 6 DC16 Animal Handheld Vacuum Cleaners | Enpower

ENL-DC16 21.6V 2.5Ah 54Wh Li-ion Replacement Battery DC16 for Dyson DC16 / DC16 Root 6 / DC16 Animal Handheld Vacuum Cleaners

Enpower ENL-DC16 is a high-rate Li-ion rechargeable battery engineered as a faithful OEM-spec replacement for the Dyson DC16 battery (OEM part number DC16) used across the Dyson handheld vacuum cleaner line - the DC16, DC16 Root 6 and DC16 Animal models. With a 21.6V nominal voltage and 2.5Ah 54Wh capacity, the pack delivers the sustained high-current output that the DC16 digital motor demands, keeping suction strong and consistent from the first second of spot cleaning to the last, with no fading under load. Built around premium high quality long-cycle Li-ion cells, the pack carries no memory effect - top it up anytime between quick cleanups without capacity loss - and a built-in BMS protection circuit guards against over-charge, over-discharge, over-current, short-circuit and over-temperature conditions for safe everyday household use. The 14.0*7.4*3.0 cm grey housing faithfully follows the original DC16 battery dimensions and clip geometry for a plug-and-play fit with no modification, while the high impact ABS/PC composite shell withstands daily bumps and drops around the home. Manufactured in Guangdong China with 100% aging testing before shipment and a 12-month full quality warranty, the ENL-DC16 brings your Dyson handheld vacuum back to full run time at a fraction of the cost of a brand-new machine.

Basic Product Information

Brand
Enpower
Model No.
ENL-DC16
Applicable Equipment
Handheld Vacuum Cleaner (Dyson DC16 Series)
Matching OEM Models
DC16
Battery Type
Li-ion (Lithium-ion)
Nominal Voltage
21.6V
Nominal Capacity
2.5Ah (54Wh)
Overall Size (H*W*D)
14.0*7.4*3.0 cm (140*74*30 mm)
Weight
335g
Color
Grey
Shell Material
High Impact ABS/PC
Cell Quality
High Quality Long Cycle Li-ion Cells
Protective Function
Built-in BMS: Over-Charge / Over-Discharge / Over-Current / Short-Circuit / Over-Temperature Protection
Application
Power Tools / Home Appliances / Consumer Electronics
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
OEM / ODM
Available
Warranty Period
12 Months

Compatible Models

The ENL-DC16 replacement battery is fully compatible with all Dyson DC16 handheld vacuum cleaner models:

Dyson DC16 Dyson DC16 Root 6 Dyson DC16 Animal

Product Description & Core Advantages

✅ One Battery for the Entire Dyson DC16 Line
Direct replacement for the Dyson DC16 OEM battery, purpose-built to cover the full DC16 handheld vacuum family in a single SKU - the DC16, DC16 Root 6 and DC16 Animal models. The 21.6V nominal voltage and 2.5Ah 54Wh energy rating match the original battery specification, so runtime and power stay true to what your handheld delivered when new - enough for spot cleaning, stairs and car interiors on a single charge, with no fading under load thanks to high-rate cells that keep feeding the digital motor the current it demands.

✅ Built-in BMS, 5-Layer Protection for Household Safety
A built-in BMS protection circuit guards every pack against over-charge, over-discharge, over-current, short-circuit and over-temperature conditions - essential safeguards for a battery that lives inside a household appliance and charges on the dock between cleanups. Premium high quality long-cycle Li-ion cells hold hundreds of charge cycles, and Li-ion chemistry has no memory effect: top up anytime after quick cleanups without capacity loss.

✅ Faithful OEM-Spec Fit, Durable Grey Housing
The 14.0*7.4*3.0 cm grey housing faithfully follows the original DC16 battery dimensions and clip geometry for a true plug-and-play fit - click the pack into the handheld handle or the charging dock and the vacuum is ready to run, no tools or modification required. The high impact ABS/PC composite shell is anti-drop and wear resistant for daily household use, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

  • ⭐ Dyson DC16 OEM Battery Replacement - Direct replacement for OEM battery DC16, drop-in fit for the DC16 / DC16 Root 6 / DC16 Animal handheld vacuums without modification
  • ⭐ 21.6V 2.5Ah 54Wh True-to-Spec Output - Matches the original voltage and energy rating, keeping digital-motor suction strong and consistent with no fading under load
  • ⭐ BMS 5-Layer Protection - Over-charge, over-discharge, over-current, short-circuit and over-temperature protection built in for safe everyday household use
  • ⭐ No Memory Effect - Li-ion chemistry lets you top up anytime between cleanups without capacity loss
  • ⭐ Durable Housing & Warranty - Grey high impact ABS/PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

Related Power Tool Batteries

Safety Cautions

  • ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.

  • ⚠ Keep battery terminals away from metal objects such as coins, keys and paper clips to prevent accidental short-circuit - a particular risk in drawers and storage boxes. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods, and never leave it inside a hot vehicle.

  • ⚠ Only charge with the original Dyson DC16 Li-ion compatible charger or charging dock (CC/CV charging logic) designed for the DC16 battery. Do NOT use Ni-CD or Ni-MH chargers on this Li-ion battery - the charging logic is completely different and may cause under-charge, overheating, permanent damage or safety hazards.

  • ⚠ Let the pack cool down after a full cleanup session before recharging, and charge in a dry area at room temperature. For long-term storage, keep the pack at roughly half charge in a cool dry place and check it every 2-3 months. Do not store a fully depleted pack for extended periods. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations - do not put them in household waste.

Frequently Asked Questions

Q1: Is ENL-DC16 fully compatible with the Dyson DC16, DC16 Root 6 and DC16 Animal?-
A: Yes. ENL-DC16 is a faithful OEM-spec replacement for the Dyson DC16 battery, with identical 21.6V nominal voltage and a grey housing that follows the original dimensions and clip geometry for a plug-and-play fit. It works across the entire Dyson DC16 handheld vacuum line - the DC16, DC16 Root 6 and DC16 Animal models listed in the compatibility table above. No modification required: click the pack into the handheld handle or the charging dock and it is ready to run.
Q2: How does the 2.5Ah 54Wh capacity compare with the original battery runtime?+
A: The 21.6V / 2.5Ah / 54Wh rating is designed to match the original DC16 battery specification, so you get the same run time per charge as your handheld delivered when new - typically enough for spot cleaning, stairs and car interiors on a single charge. Handheld vacuums run their digital motor at full power constantly, so runtime is shorter than a stick vacuum by design. Because the pack uses Li-ion cells with no memory effect, you can top it up anytime after quick cleanups without capacity loss, which keeps the battery healthy over hundreds of cycles.
Q3: Can I charge ENL-DC16 on an old Ni-CD or Ni-MH charger?+
A: No. This is a Li-ion pack and requires the original Dyson DC16 Li-ion compatible charger or charging dock with CC/CV (constant current / constant voltage) charging logic designed for the DC16 battery. Ni-CD and Ni-MH chargers use completely different negative delta-V charging logic - putting a Li-ion pack on one may cause under-charge, overheating, permanent damage or safety hazards. Always use the charger or dock that shipped with your Dyson DC16 vacuum, or a replacement explicitly rated for 21.6V Dyson DC16 Li-ion packs.
Q4: Will ENL-DC16 also fit other Dyson handheld or stick vacuums (V6 / V7 / V8 / V10 / V11), other brands, or power tools?+
A: No. ENL-DC16 (replacement for OEM battery DC16) is designed ONLY for the Dyson DC16 series handheld vacuums listed in the compatibility table above. Other Dyson models are not interchangeable - even where the nominal voltage looks close: the V6 / V7 / V8 stick vacuums run on a 21.6V pack, but with a completely different housing, contact layout and clip design; the V10 / V11 / V15 line and the DC31 / DC34 / DC35 / DC44 / DC45 handhelds each use their own packs. Other vacuum brands use their own proprietary pack designs. The same applies across product categories: power tool batteries (Makita BL-, Bosch, DeWalt, Milwaukee and others) and two-way radio batteries (Motorola NTN / HNN / PMNN / NNTN, ICOM BP-, KENWOOD KNB-, Vertex FNB-, Hytera BH/BL series) have completely different housings, contacts and voltages and must never be used in vacuum cleaners. Always match the OEM battery part number and the voltage printed on your machine before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.

Contact Us & Send Inquiry