📞 Tel:+86-750-3857665

Email:sales@enpowertec.com

ENL-V7 Dyson vacuum battery replacement

enpower P/N: ENL-V7

oem battery:V7

Part Number:

Manufacturer (OEM):

oem model:

chemistry:Li-ion

voltge:21.6V

capacity:2AH 43.2WH / 2.2AH 47.52WH / 2.6AH 56.16WH / 3AH 64.8WH

Voltage/Capacity:

Demension (H*W*D)(cm):13.1*80.*12.5

compatible radio:

Description:Replacement Battery V7 for Dyson V7 Trigger Motorhead Pro Animal Vacuum Cleaner Battery

compatible models:For Dyson V7 Motorhead, V7 Animal, V7 Animal Pro+ V7 Trigger, V7 Trigger HEPA, V7 Absolute

PRODUCT INFORMATION

ENL-V7 21.6V 2.0Ah/2.2Ah/2.6Ah/3.0Ah 43.2-64.8Wh Li-ion Replacement Battery V7 for Dyson V7 Absolute V7 Animal V7 Animal Pro+ V7 Motorhead V7 Trigger V7 Trigger HEPA Vacuum Cleaners | Enpower

ENL-V7 21.6V 2.0Ah / 2.2Ah / 2.6Ah / 3.0Ah 43.2-64.8Wh Li-ion Replacement Battery V7 for Dyson V7 Series Cordless Vacuum Cleaners - V7 Absolute / V7 Animal / V7 Animal Pro+ / V7 Motorhead / V7 Trigger / V7 Trigger HEPA

Enpower ENL-V7 is a high-rate Li-ion rechargeable battery engineered as a faithful OEM-spec replacement for the Dyson V7 battery (OEM part number V7) used across the Dyson V7 cordless vacuum cleaner line - the V7 Absolute, V7 Animal, V7 Animal Pro+ and V7 Motorhead stick vacuums plus the V7 Trigger and V7 Trigger HEPA handheld models. With a 21.6V nominal voltage and four capacity grades - 2.0Ah (43.2Wh), 2.2Ah (47.52Wh), 2.6Ah (56.16Wh) and 3.0Ah (64.8Wh) - the pack delivers the sustained high-current output that Dyson's digital motors demand, keeping suction strong and consistent from the first second of cleaning to the last, with no fading under load. Built around premium high quality long-cycle Li-ion cells, the pack carries no memory effect - top it up anytime between rooms or after quick cleanups without capacity loss - and a built-in BMS protection circuit guards against over-charge, over-discharge, over-current, short-circuit and over-temperature conditions for safe everyday household use. The 13.1*8.0*12.5 cm grey housing faithfully follows the original V7 battery dimensions and clip geometry for a plug-and-play fit with no modification, while the high impact ABS+PC composite shell withstands daily bumps and drops around the home. Manufactured in Guangdong China with 100% aging testing before shipment and a 12-month full quality warranty, the ENL-V7 brings your Dyson V7 vacuum back to full run time at a fraction of the cost of a brand-new machine.

Basic Product Information

Brand
Enpower
Model No.
ENL-V7
Applicable Equipment
Cordless Vacuum Cleaner (Dyson V7 Series)
Matching OEM Models
V7
Battery Type
Li-ion (Lithium-ion)
Nominal Voltage
21.6V
Nominal Capacity
2.0Ah (43.2Wh) / 2.2Ah (47.52Wh) / 2.6Ah (56.16Wh) / 3.0Ah (64.8Wh)
Overall Size (H*W*D)
13.1*8.0*12.5 cm (131*80*125 mm)
Weight
380g
Color
Grey
Shell Material
High Impact ABS+PC
Cell Quality
High Quality Long Cycle Li-ion Cells
Protective Function
Built-in BMS: Over-Charge / Over-Discharge / Over-Current / Short-Circuit / Over-Temperature Protection
Application
Power Tools / Home Appliances / Consumer Electronics
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
OEM / ODM
Available
Warranty Period
12 Months

Compatible Models

The ENL-V7 replacement battery is fully compatible with all Dyson V7 series cordless vacuum cleaner models:

Dyson V7 Motorhead Dyson V7 Animal Dyson V7 Animal Pro+ Dyson V7 Trigger Dyson V7 Trigger HEPA Dyson V7 Absolute

Product Description & Core Advantages

✅ Four Capacity Grades, One Battery for the Entire Dyson V7 Line
Direct replacement for the Dyson V7 OEM battery, offered in 2.0Ah (43.2Wh), 2.2Ah (47.52Wh), 2.6Ah (56.16Wh) and 3.0Ah (64.8Wh) and purpose-built to cover the full V7 cordless vacuum family in a single SKU - the V7 Absolute, V7 Animal, V7 Animal Pro+ and V7 Motorhead stick vacuums plus the V7 Trigger and V7 Trigger HEPA handhelds. All four grades share the same housing and clip geometry, so you can pick the budget-friendly rotation grade or the longest-running 3.0Ah upgrade without worrying about fit.

✅ Built-in BMS, 5-Layer Protection for Household Safety
A built-in BMS protection circuit guards every pack against over-charge, over-discharge, over-current, short-circuit and over-temperature conditions - essential safeguards for a battery that lives inside a household appliance and charges on the wall dock between cleanups. Premium high quality long-cycle Li-ion cells hold hundreds of charge cycles, and Li-ion chemistry has no memory effect: top up anytime after quick cleanups without capacity loss.

✅ Faithful OEM-Spec Fit, Durable Grey Housing
The 13.1*8.0*12.5 cm grey housing faithfully follows the original V7 battery dimensions and clip geometry for a true plug-and-play fit - click the pack into the vacuum handle or the charging dock and the vacuum is ready to run, no tools or modification required. The high impact ABS+PC composite shell is anti-drop and wear resistant for daily household use, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

  • ⭐ Dyson V7 OEM Battery Replacement - Direct replacement for OEM battery V7, drop-in fit for V7 Motorhead / V7 Animal / V7 Animal Pro+ / V7 Trigger / V7 Trigger HEPA / V7 Absolute without modification
  • ⭐ 2.0Ah / 2.2Ah / 2.6Ah / 3.0Ah Four Capacity Choice - From budget rotation stock to the longest 3.0Ah run time, all on one housing
  • ⭐ BMS 5-Layer Protection - Over-charge, over-discharge, over-current, short-circuit and over-temperature protection built in for safe everyday household use
  • ⭐ No Memory Effect - Li-ion chemistry lets you top up anytime between cleanups without capacity loss
  • ⭐ Durable Housing & Warranty - Grey high impact ABS+PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

Related Power Tool Batteries

Safety Cautions

  • ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.

  • ⚠ Keep battery terminals away from metal objects such as coins, keys and paper clips to prevent accidental short-circuit - a particular risk in drawers and storage boxes. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods, and never leave it inside a hot vehicle.

  • ⚠ Only charge with the original Dyson V7 Li-ion compatible charger or charging dock (CC/CV charging logic) designed for the V7 battery. Do NOT use Ni-CD or Ni-MH chargers on this Li-ion battery - the charging logic is completely different and may cause under-charge, overheating, permanent damage or safety hazards.

  • ⚠ Let the pack cool down after a full-home clean before recharging, and charge in a dry area at room temperature. For long-term storage, keep the pack at roughly half charge in a cool dry place and check it every 2-3 months. Do not store a fully depleted pack for extended periods. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations - do not put them in household waste.

Frequently Asked Questions

Q1: Is ENL-V7 fully compatible with the Dyson V7 Motorhead, V7 Animal, V7 Trigger and the other listed models?-
A: Yes. ENL-V7 is a faithful OEM-spec replacement for the Dyson V7 battery, with identical 21.6V nominal voltage and a grey housing that follows the original dimensions and clip geometry for a plug-and-play fit. It works across the entire Dyson V7 cordless vacuum line - the V7 Motorhead, V7 Animal, V7 Animal Pro+ and V7 Absolute stick vacuums as well as the V7 Trigger and V7 Trigger HEPA handheld models listed in the compatibility table above. No modification required: click the pack into the vacuum handle or the charging dock and it is ready to run.
Q2: How do I choose between the 2.0Ah, 2.2Ah, 2.6Ah and 3.0Ah capacity grades?+
A: All four grades share the same 21.6V platform, housing and clip, so any of them powers every listed V7 model - the difference is run time. 2.0Ah (43.2Wh) is the budget-friendly choice for high-turnover rotation stock; 2.2Ah (47.52Wh) and 2.6Ah (56.16Wh) are the balanced all-rounders for daily whole-home cleaning; 3.0Ah (64.8Wh) delivers 50% more run time than 2.0Ah for long sessions without swapping. Actual runtime also depends on the power mode you select - MAX mode drains any battery faster than standard mode. Because the pack uses Li-ion cells with no memory effect, you can top it up anytime after quick cleanups without capacity loss.
Q3: Can I charge ENL-V7 on an old Ni-CD or Ni-MH charger?+
A: No. This is a Li-ion pack and requires the original Dyson V7 Li-ion compatible charger or charging dock with CC/CV (constant current / constant voltage) charging logic designed for the V7 battery. Ni-CD and Ni-MH chargers use completely different negative delta-V charging logic - putting a Li-ion pack on one may cause under-charge, overheating, permanent damage or safety hazards. Always use the charger or dock that shipped with your Dyson V7 vacuum, or a replacement explicitly rated for 21.6V Dyson V7 Li-ion packs.
Q4: Will ENL-V7 also fit Dyson V6 / V8 / V10 / V11 / V15 vacuums, other vacuum brands, or power tools?+
A: No. ENL-V7 (replacement for OEM battery V7) is designed ONLY for the Dyson V7 series cordless vacuums listed in the compatibility table above. Other Dyson platforms are not interchangeable: the V6 line uses a pack with different clip geometry, the V8 pack is physically larger, and the V10 / V11 / V15 lines run on higher-voltage packs with different cell counts, housings and latch designs - even where the nominal voltage looks close, the housings and contacts do not match. Vacuum brands other than Dyson use their own proprietary pack designs. The same applies across product categories: power tool batteries (Makita BL-, Bosch, DeWalt, Milwaukee and others) and two-way radio batteries (Motorola NTN / HNN / PMNN / NNTN, ICOM BP-, KENWOOD KNB-, Vertex FNB-, Hytera BH/BL series) have completely different housings, contacts and voltages and must never be used in vacuum cleaners. Always match the OEM battery part number and the voltage printed on your machine before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.

Contact Us & Send Inquiry