ENL-MA1013 10.8V 1.5Ah / 2.0Ah Li-ion Power Tool Replacement Battery BL1013 BL1014 LCT203W for Makita 10.8 Volt Cordless Drill Power Tools CL100DW / DF030D / DF330D / TD090D and More

The ENL-MA1013 replacement battery is fully compatible with the following Makita 10.8 Volt cordless drill power tool models:

✅ 1.5Ah / 2.0Ah Dual Capacity for the Makita 10.8V Fleet
Direct replacement for the Makita OEM batteries BL1013 / BL1014 (LCT203W / 194550-6 / 194551-4), purpose-built to cover 47 tools in a single SKU - the CL100 / CL102 vacuum series, the DF030D and DF330D drill series with all variants, the DT01 / FD01 / FD02 tool line, the HU01 / MU01 / SH01 series, the JR100DWE reciprocating saw, the JV100DW / JV100DZ jigsaws, the LC01 / LM01W / LM02 / ML100W / ML101 lights, the TD090D impact driver series, the UH200DWE / UH200DWEX, the UM164D series and the WT01 line. One battery standard for your mixed Makita 10.8V fleet means unified procurement and simplified rotation.

✅ Built-in BMS, 5-Layer Protection, Featherweight 170g
A built-in BMS protection circuit guards every pack against over-charge, over-discharge, over-current, short-circuit and over-temperature conditions - essential safeguards for compact Li-ion cells. Premium high quality long-cycle Li-ion cells deliver stable 10.8V output, and at just 170g the pack keeps compact tools balanced and fatigue-free during overhead or precision work. Li-ion chemistry has no memory effect - top up anytime without capacity loss.

✅ Faithful OEM-Spec Fit, Rugged Black Housing
The palm-size 5.1*5.05*7.8 cm slide housing faithfully follows the original battery dimensions and latch geometry for a true plug-and-play fit - slide the pack on, hear the latch click, and the tool is ready to work. The black high impact ABS/PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

• ⭐ Makita BL1013 / BL1014 Replacement - Five OEM part numbers covered by one SKU, drop-in fit across all 47 listed models without modification
• ⭐ 1.5Ah / 2.0Ah Dual Capacity - 16.2Wh standard rotation or 21.6Wh with roughly 33% more runtime per charge, same housing, fully interchangeable
• ⭐ BMS 5-Layer Protection - Over-charge, over-discharge, over-current, short-circuit and over-temperature protection built in
• ⭐ Featherweight 170g, No Memory Effect - Keeps compact tools balanced; Li-ion chemistry lets you top up anytime without capacity loss
• ⭐ Rugged Housing & Warranty - Black high impact ABS/PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit - a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods, and never leave it inside a hot vehicle.

• ⚠ Only charge with a Makita 10.8V Li-ion compatible charger (CC/CV charging logic) designed for the BL1013 / BL1014 battery family. Do NOT use Ni-CD or Ni-MH chargers on this Li-ion battery - the charging logic is completely different and may cause under-charge, overheating, permanent damage or safety hazards.

• ⚠ Let the pack cool down after heavy use before recharging, and charge in a dry area at room temperature. For long-term storage, keep the pack at roughly half charge in a cool dry place and check it every 2-3 months. Do not store a fully depleted pack for extended periods. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations - do not put them in household waste.