ENL-BO610G 18V 3Ah / 4Ah / 5Ah / 6Ah 54-108Wh Li-ion Power Tool Replacement Battery BAT610G for Bosch Drill BAT609 / BAT609G / BAT618 / BAT618G / BAT619 / BAT619G Cordless Drills

The ENL-BO610G replacement battery is fully compatible with the following Bosch 18V Li-ion slide-pack battery models and catalog numbers:

✅ Four Capacity Grades, One 18V Slide-Rail Platform
Direct replacement for the Bosch BAT610G OEM battery, offered in 3.0Ah (54Wh), 4.0Ah (72Wh), 5.0Ah (90Wh) and 6.0Ah (108Wh). All four grades share the same slide-rail housing and latch geometry and cover the wider Bosch 18V Li-ion family - BAT609, BAT609G, BAT618, BAT618G, BAT619, BAT619G and five 2 607 336 xxx catalog numbers - so your team can mix and match packs and chargers across the fleet without sorting by capacity.

✅ Li-ion Power with Full BMS Protection
Premium high quality long-cycle Li-ion cells deliver fade-free 18V output under heavy drilling and driving loads, with no memory effect and no self-discharge worries between jobs - top up whenever convenient. A built-in BMS (Battery Management System) guards every pack against over-charge, over-discharge, over-current, short circuit and overheating, protecting both the battery and your tools.

✅ Faithful OEM-Spec Fit, Classic Black Slide Housing
The 12.5*9.0*8.0 cm black housing faithfully follows the original BAT610G dimensions and slide-rail geometry for a true plug-and-play fit - slide the pack onto the tool base, hear the latch engage, and the tool is ready to work. The high impact ABS+PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

• ⭐ Bosch BAT610G Replacement - Direct drop-in fit, also covers the BAT609 / BAT609G / BAT618 / BAT618G / BAT619 / BAT619G family and five 2 607 336 xxx catalog numbers without modification
• ⭐ 3.0Ah / 4.0Ah / 5.0Ah / 6.0Ah Four Capacity Choice - From budget rotation stock to double run time, all on one slide-rail housing
• ⭐ Built-in BMS Five-Fold Protection - Over-charge, over-discharge, over-current, short circuit and over-temperature protection in every pack
• ⭐ No Memory Effect, No Self-Discharge Worries - Charge anytime without capacity penalty; packs hold their charge in storage between jobs
• ⭐ Rugged Jobsite Housing & Warranty - Black high impact ABS+PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

• ⚠ Stop using the pack immediately if you notice swelling, unusual heat or a burning smell, and contact the seller for support. Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause electrolyte leakage, overheating or fire.

• ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit - a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods, and never leave it inside a hot vehicle.

• ⚠ Only charge with a Bosch 18V Li-ion compatible CC/CV charger designed for the BAT610G battery family. Do NOT use a Ni-CD or Ni-MH charger on this Li-ion battery - the charging logic is completely different and may cause under-charge, overheating, permanent damage or safety hazards.

• ⚠ Let the pack cool down after heavy use before recharging, and charge in a dry area at room temperature. For long-term storage, keep the pack at roughly half charge in a cool dry place and top it up every few months. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations - do not put them in household waste.