ENL-FNB95 7.4V 2600mAh Li-ion Two-way Radio Battery FNB-V95LI for Vertex Standard VX-350 VX-351 VX-354 Walkie Talkie | Enpower
ENL-FNB95 7.4V 2600mAh Li-ion Rechargeable Battery for Vertex Standard VX-350 / VX-351 / VX-354 Two-way Radio
Enpower ENL-FNB95 high-performance lithium-ion rechargeable battery engineered as a faithful OEM-spec replacement power supply for Vertex Standard OEM battery FNB-V95LI. Fully compatible with the Vertex Standard VX-350 series portable radios — including VX-350, VX-351, VX-351U, VX-354 and VX-354U — the full-featured business handhelds widely deployed by construction, security, manufacturing, logistics, property management and event operations fleets. Built around premium high quality long-cycle Li-ion cells with stable 7.4V nominal voltage and a full 2600mAh capacity, a high impact ABS/PC composite shell and brass golden plated low-resistance contacts. The 9.96*5.67*2.20cm form factor faithfully follows the original FNB-V95LI battery dimensions, preserving the radio's balance and on-person carry comfort. Advanced protection circuitry guards against over-charge, over-discharge, over-current, over-temperature and reverse polarity, and the pack works with your existing VX-350 series Li-ion chargers (CC/CV 8.4V logic) with zero new charging infrastructure. Manufactured in Guangdong China with 12-month full quality warranty.
Basic Product Information
Applicable Equipment
Two-way Radio / Walkie Talkie
Matching OEM Models
FNB-V95LI
Battery Type
Li-ion (Lithium-Ion)
Overall Size (H*W*D)
9.96*5.67*2.20 cm
Shell Material
High Impact ABS/PC
Contact Material
Brass Golden Plated
Cell Quality
High Quality Long Cycle Li-ion Cells
Protective Function
Over-Current Protection + Over-Charge Protection + Over-Discharge Protection + Temperature Sensor + Reverse Polarity Protection
Application
Consumer Electronics / Two-way Radio
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
Warranty Period
12 Months
Compatible Radio Models
The ENL-FNB95 replacement battery is fully compatible with the following Vertex Standard two-way radio models:
VX-350
VX-351
VX-351U
VX-354
VX-354U
Product Description & Core Advantages
✅ Drop-in Power for the Vertex Standard VX-350 Series
Direct replacement for Vertex Standard OEM battery FNB-V95LI, purpose-built for the VX-350 / VX-351 / VX-351U / VX-354 / VX-354U business portables. The 9.96*5.67*2.20cm housing faithfully follows the original battery dimensions — plug-and-play fit, no modification required. One battery standard covering the entire VX-350 family (VHF and UHF variants alike) for unified fleet management.
✅ 2600mAh High-Capacity Li-ion for Full-Shift Duty
Premium high quality long-cycle Li-ion cells deliver stable 7.4V output and a full 2600mAh capacity — enough for 12-14 hours of operation under standard duty cycles, comfortably covering full shifts on demanding construction sites and security patrols. Li-ion chemistry has no memory effect and a low self-discharge rate, supporting frequent opportunity charging without capacity loss — ideal for back-to-back shifts and spare-battery rotation programs.
✅ 5-Layer Protection & Zero Charger Investment
Built-in protection circuitry guards against over-charge, over-discharge, over-current, over-temperature and reverse polarity — complete cell-level safety for daily operations. Robust high-impact ABS/PC composite housing and brass golden plated low-resistance contacts — anti-drop, dustproof and moisture resistant for harsh jobsite conditions. Works with your existing Vertex Standard VX-350 series Li-ion chargers (CC/CV 8.4V logic) — no new charging infrastructure required.
- ⭐ OEM FNB-V95LI Replacement — Faithfully matches original dimensions (9.96*5.67*2.20cm), drop-in fit for VX-350 / VX-351 / VX-351U / VX-354 / VX-354U without modification
- ⭐ 2600mAh Full-Shift Runtime — 12-14 hours of operation under standard duty cycles, keeping crews connected through back-to-back shifts
- ⭐ 5-Layer Safety Protection — Over-charge / over-discharge / over-current / temperature sensor / reverse polarity protection integrated for daily reliability
- ⭐ Memory-Free & Low Self-Discharge Li-ion — No memory effect, recharge at any state of charge, holds charge far longer in storage than Ni-CD / Ni-MH packs
- ⭐ Industrial Craftsmanship & Warranty — Brass golden plated contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty
Related Two-way Radio Batteries
Safety Cautions
⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice swelling, unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.
⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.
⚠ Only charge with a Li-ion compatible charger using CC/CV 8.4V charging logic — including your existing Vertex Standard VX-350 series charger for FNB-V95LI-type packs. Do NOT use a Ni-CD / Ni-MH negative delta-V charger on this Li-ion battery — the charging logic is completely different and may cause over-charge, overheating or permanent damage.
⚠ For long-term storage, keep the pack at roughly half charge in a cool dry place. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations — do not put them in household waste.
Frequently Asked Questions
Q1: Is ENL-FNB95 fully compatible with OEM FNB-V95LI and the Vertex Standard VX-350 series radios?-
A: Yes. ENL-FNB95 is a faithful OEM replacement for Vertex Standard FNB-V95LI, with identical 9.96*5.67*2.20cm housing dimensions and a plug-and-play fit for the VX-350, VX-351, VX-351U, VX-354 and VX-354U portables — both VHF and UHF variants. No modification required, and your existing VX-350 series Li-ion charger keeps working.
Q2: How long does the 2600mAh pack last on a single charge, and can I charge it at any time?+
A: Under standard duty cycles, the 2600mAh capacity delivers approximately 12-14 hours of operation — comfortably covering a full shift on construction sites or security patrols. Li-ion chemistry has no memory effect, so you can recharge at any state of charge without capacity loss, and the pack's low self-discharge rate means it holds its charge far longer in storage than Ni-CD or Ni-MH packs. Always charge with a Li-ion compatible CC/CV 8.4V charger.
Q3: Can I use my old Ni-CD / Ni-MH charger or a generic charger on this Li-ion battery?+
A: No. Li-ion cells require a dedicated CC/CV (constant current / constant voltage) 8.4V charging logic, while Ni-CD / Ni-MH chargers use negative delta-V or timer-based cutoff — the two logics are completely different. Charging this Li-ion pack on a Ni-CD / Ni-MH charger may cause over-charge, overheating or permanent damage. Use only a Li-ion compatible charger such as your existing Vertex Standard VX-350 series charger for FNB-V95LI-type packs.
Q4: Will ENL-FNB95 also fit VX-230, VX-231, VX-450, EVX-530, VX-260, Motorola, ICOM or other radio models?+
A: No. ENL-FNB95 (replacement for OEM FNB-V95LI) is designed ONLY for the Vertex Standard VX-350 / VX-351 / VX-351U / VX-354 / VX-354U portables listed above. Other Vertex Standard radios use different battery families: the VX-230 / VX-231 / VX-228 series uses FNB-V104LI (Li-ion) or FNB-V106 (Ni-MH), the VX-450 / VX-451 / VX-454 / VX-459 series uses FNB-V113LI, the EVX-530 DMR series uses FNB-V134LI, and the VX-260 series uses FNB-V131 — housing dimensions, voltage platform, contact arrangement and locking mechanism are NOT interchangeable across these families. The same applies across brands: Motorola radios use their own NTN/NNTN/PMNN/HNN families, ICOM radios use the BP- series, KENWOOD radios use the KNB- series, and Hytera radios use the BH/BL series — Vertex/Yaesu packs do not fit Motorola, ICOM, KENWOOD or Hytera radios and vice versa. Always check the OEM battery part number printed on your existing battery before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.
Contact Us & Send Inquiry