📞 Tel:+86-750-3857665

Email:sales@enpowertec.com

ENH-FNB106 two way radio battery for construction

enpower P/N:ENH-FNB106

oem battery:FNB-V106

Part Number:

Manufacturer (OEM):

oem model:

chemistry:Ni-MH

voltge:7.2V

capacity:1200mAh

Voltage/Capacity:

Demension (H*W*D)(cm):8.95*6.07*2.25

compatible radio:VX-230 VX-231 VX-228

Description:

compatible models:

PRODUCT INFORMATION

ENH-FNB106 7.2V 1200mAh Ni-MH Two-way Radio Battery FNB-V106 for Vertex Standard VX-230 VX-231 VX-228 Walkie Talkie | Enpower

ENH-FNB106 7.2V 1200mAh Ni-MH Rechargeable Battery for Vertex Standard VX-230 / VX-231 / VX-228 Two-way Radio

Enpower ENH-FNB106 high-performance nickel-metal hydride rechargeable battery engineered as a faithful OEM-spec replacement power supply for Vertex Standard OEM battery FNB-V106. Fully compatible with the Vertex Standard VX-230 / VX-231 / VX-228 compact analog portables — the value-class handhelds widely deployed by retail, hospitality, property management, education, warehousing and event security fleets. Built around premium high quality long-cycle Ni-MH cells with stable 7.2V nominal voltage and 1200mAh capacity, a high impact ABS/PC composite shell and brass golden plated low-resistance contacts. The 8.95*6.07*2.25cm form factor faithfully follows the original FNB-V106 battery dimensions, preserving the radio's balance and on-person carry comfort. The pack is cadmium-free and memory-effect free, supports frequent opportunity charging, and works with your existing VX-230 series Ni-MH chargers (negative delta-V logic) with zero new charging infrastructure. Manufactured in Guangdong China with 12-month full quality warranty.

Basic Product Information

Brand
Enpower
Model No.
ENH-FNB106
Applicable Equipment
Two-way Radio / Walkie Talkie
Matching OEM Models
FNB-V106
Battery Type
Ni-MH (Nickel-Metal Hydride)
Nominal Voltage
7.2V
Nominal Capacity
1200mAh
Overall Size (H*W*D)
8.95*6.07*2.25 cm
Color
Black
Shell Material
High Impact ABS/PC
Contact Material
Brass Golden Plated
Cell Quality
High Quality Long Cycle Ni-MH Cells
Protective Function
Short-Circuit Protection + Over-Temperature Protection + Charging Temperature Sensor + Reverse Polarity Protection
Application
Consumer Electronics / Two-way Radio
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
OEM / ODM
Available
Warranty Period
12 Months

Compatible Radio Models

The ENH-FNB106 replacement battery is fully compatible with the following Vertex Standard two-way radio models:

VX-230                VX-231                VX-228

Product Description & Core Advantages

✅ Drop-in Power for the Vertex Standard VX-230 / VX-231 / VX-228
Direct replacement for Vertex Standard OEM battery FNB-V106, purpose-built for the VX-230 / VX-231 / VX-228 compact value-class portables. The 8.95*6.07*2.25cm housing faithfully follows the original battery dimensions — plug-and-play fit, no modification required. One battery standard covering all three models for unified fleet management across mixed VX-230 family inventories.

✅ 1200mAh Ni-MH Value Capacity with Memory-Free Convenience
Premium high quality long-cycle Ni-MH cells deliver stable 7.2V output and 1200mAh capacity — enough for 6-8 hours of operation under standard duty cycles, comfortably covering typical retail and facility shifts. Ni-MH chemistry has no memory effect and is completely cadmium-free, so users can recharge at any state of charge without capacity loss, and the pack is RoHS-friendly for environmentally conscious operations.

✅ 4-Layer Protection & Zero Charger Investment
Short-circuit protection, over-temperature protection, an integrated charging temperature sensor and reverse polarity protection safeguard daily operations. Robust high-impact ABS/PC composite housing and brass golden plated low-resistance contacts — anti-drop, dustproof and moisture resistant. Works with your existing Vertex Standard VX-230 series Ni-MH chargers (negative delta-V logic) — no new charging infrastructure required.

  • ⭐ OEM FNB-V106 Replacement — Faithfully matches original dimensions (8.95*6.07*2.25cm), drop-in fit for VX-230 / VX-231 / VX-228 without modification

  • ⭐ 1200mAh Shift-Ready Runtime — 6-8 hours of operation under standard duty cycles, ideal for daily rotation pools and spare-battery programs

  • ⭐ 4-Layer Safety Protection — Short-circuit / over-temperature / charging temperature sensor / reverse polarity protection integrated for daily reliability

  • ⭐ Memory-Free & Cadmium-Free Ni-MH — No memory effect, recharge at any state of charge, no cadmium content, environmentally responsible chemistry

  • ⭐ Industrial Craftsmanship & Warranty — Brass golden plated contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

Related Two-way Radio Batteries

Safety Cautions

  • ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage or overheating. Stop using the battery immediately if you notice leakage, unusual heat or deformation, and move it to a safe non-flammable area away from combustibles.

  • ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

  • ⚠ Only charge with a Ni-MH compatible charger using negative delta-V (or timer-based) charging logic — including your existing Vertex Standard VX-230 series charger for FNB-V106-type packs. Do NOT use a Li-ion CC/CV charger on this Ni-MH battery — the charging logic is completely different and may cause over-charge, overheating or permanent damage.

  • ⚠ For long-term storage, keep the pack fully charged in a cool dry place and recharge every 2-3 months. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations — do not put them in household waste.

Frequently Asked Questions

Q1: Is ENH-FNB106 fully compatible with OEM FNB-V106 and the Vertex Standard VX-230 / VX-231 / VX-228 radios?-
A: Yes. ENH-FNB106 is a faithful OEM replacement for Vertex Standard FNB-V106, with identical 8.95*6.07*2.25cm housing dimensions and a plug-and-play fit for the VX-230, VX-231 and VX-228 compact portables. No modification required, and your existing VX-230 series Ni-MH charger keeps working.
Q2: How long does the 1200mAh pack last on a single charge, and can I charge it at any time?+
A: Under standard duty cycles, the 1200mAh capacity delivers approximately 6-8 hours of operation — comfortably covering typical retail and facility shifts. Ni-MH chemistry has no memory effect, so you can recharge at any state of charge without capacity loss. For best battery health, charge with a Ni-MH compatible negative delta-V charger and keep the pack topped up between shifts.
Q3: Can I use a Li-ion charger or a generic charger on this Ni-MH battery?+
A: No. Ni-MH cells require negative delta-V (or timer-based) charging logic, while Li-ion chargers use CC/CV (constant current / constant voltage) — the two logics are completely different. Charging this Ni-MH pack on a Li-ion CC/CV charger may cause over-charge, overheating or permanent damage. Use only a Ni-MH compatible charger such as your existing Vertex Standard VX-230 series charger for FNB-V106-type packs.
Q4: Will ENH-FNB106 also fit VX-450, EVX-530, VX-260, Motorola XPR6550, GP328 or other radio models?+
A: No. ENH-FNB106 (replacement for OEM FNB-V106) is designed ONLY for the Vertex Standard VX-230 / VX-231 / VX-228 portables listed above. Other Vertex Standard radios use different battery families: the VX-450 / VX-451 / VX-454 / VX-459 series uses FNB-V113LI, the EVX-530 / EVX-531 / EVX-534 / EVX-539 DMR series uses FNB-V134LI, and the VX-260 series uses FNB-V131 — housing dimensions, voltage platform, contact arrangement and locking mechanism are NOT interchangeable across these families. The same applies across brands: Motorola radios use their own NTN/NNTN/PMNN/HNN families (for example PMNN4065 for the MOTOTRBO XPR6000/DP3000 series and NNTN8129 for APX2000/4000), ICOM radios use the BP- series, KENWOOD radios use the KNB- series, and Hytera radios use the BH/BL series — Vertex/Yaesu packs do not fit Motorola, ICOM, KENWOOD or Hytera radios and vice versa. Always check the OEM battery part number printed on your existing battery before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.

Contact Us & Send Inquiry