ENL-MOT4407 7.4V 2500mAh Li-ion Rechargeable Battery for Motorola XPR3000 / XPR7000 / DP4000 Series Two-way Radios

The ENL-MOT4407 replacement battery is fully compatible with the following Motorola MOTOTRBO two-way radio models:

✅ Faithful OEM Replacement for Motorola MOTOTRBO XPR / DP Series
Direct replacement for Motorola OEM battery PMNN4407, supporting the broad MOTOTRBO digital radio ecosystem: XPR3000/3300/3500 and XPR7000/7350/7550 in North America, the DP4000/4400/4401/4600/4800/4801/6401 professional series, XiR P8600-series hand-portables, DEP550/570 entry digital models and DGP8050/8550 — one battery SKU standardizing the power supply across compact, standard and smart-keypad fleets. Plug-and-play fit, no modification required.

✅ 2500mAh High-Capacity Li-ion Cell Pack with 5-Protection BMS
Premium high quality long-cycle Li-ion cells deliver stable 7.4V output and rated 2500mAh capacity — a high-capacity upgrade over many standard PMNN packs — for typical 12-14 hour operation under demanding DMR digital duty cycles (5-5-90). Built-in smart BMS module provides over current protection (OCP), over charge protection (OVP), over discharge protection (UVP), temperature sensor and reverse polarity protection — comprehensive safeguard against field failures in mission-critical deployments.

✅ Slim Housing & Ultrasonic Sonic Welding Sealing
Robust ABS/PC composite housing with ultrasonic sonic integrated welding sealing, golden plated brass low-resistance contacts — anti-drop, dustproof and moisture resistant. The slim 11.40*5.52*1.75cm form factor faithfully follows the original PMNN4407 battery dimensions, packing maximum capacity into the lowest-profile shell for comfortable full-shift belt carry.

• ⭐ OEM PMNN4407 Replacement — Faithfully matches original dimensions (11.40*5.52*1.75cm), drop-in fit for 22 Motorola MOTOTRBO radio models without chassis modification

• ⭐ 2500mAh High Capacity, 7.4V Stable Output — Long-shift operation on a single charge, low self-discharge, no memory effect thanks to Li-ion chemistry

• ⭐ High Capacity in a Slim Shell — 2500mAh packed into the 1.75cm low-profile form factor — maximum runtime without adding bulk to the duty belt

• ⭐ Mission-Critical Reliability — Engineered for DMR public safety and industrial duty: stable voltage delivery under high transmit load, 100% aging tested before shipment

• ⭐ Industrial Craftsmanship & Warranty — Golden plated brass contacts, poly bag packing ready for retail or bulk distribution, OEM private label available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice swelling, unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Li-ion compatible CC/CV (constant current / constant voltage) charger rated for 8.4V charging voltage — including your existing Motorola PMNN4407 Li-ion charger or IMPRES charger. Do NOT use a Ni-CD / Ni-MH charger on this Li-ion battery — the cutoff logic is completely different and may cause overcharge, overheating or permanent damage.

• ⚠ Do not store the battery fully discharged for long periods. For long-term storage, keep the pack at approximately 40-60% charge in a cool dry place and recharge every 3 months. This Li-ion battery contains regulated lithium cells — do not dispose of it with household waste; return the spent battery to an authorized battery recycling collection point in compliance with local regulations.