ENL-MOT8128 7.4V 2000mAh Li-ion Rechargeable Battery for Motorola APX2000 / APX4000 P25 Two-way Radios

The ENL-MOT8128 replacement battery is fully compatible with the following Motorola two-way radio models:

✅ Faithful OEM Replacement for Motorola APX2000 / APX4000 P25 Radios
Direct replacement for Motorola OEM battery NNTN8128A, supporting the APX2000 and APX4000 P25 digital radio platforms trusted by public safety agencies worldwide. Plug-and-play fit, no modification required.

✅ 2000mAh Li-ion Cell Pack with 5-Protection BMS
Premium long-cycle Li-ion cells deliver stable 7.4V output and rated 2000mAh capacity for typical 10-12 hour operation under demanding P25 digital duty cycles (5-5-90). Built-in smart BMS module provides over current protection (OCP), over charge protection (OVP), over discharge protection (UVP), temperature sensor and reverse polarity protection — comprehensive safeguard against field failures in mission-critical deployments.

✅ Slim Low-Profile Housing & Ultrasonic Welding Sealing
Robust ABS/PC composite housing with ultrasonic integrated welding sealing, golden plated brass low-resistance contacts — anti-drop, dustproof and moisture resistant. The slim 11.40*5.52*1.75cm form factor faithfully follows the original NNTN8128A battery dimensions, keeping the radio compact and comfortable for full-shift belt carry.

• ⭐ OEM NNTN8128A Replacement — Faithfully matches original slim dimensions (11.40*5.52*1.75cm), drop-in fit for APX2000 and APX4000 radios without chassis modification
• ⭐ 2000mAh Capacity, 7.4V Stable Output — Full-shift operation on a single charge, low self-discharge, no memory effect thanks to Li-ion chemistry
• ⭐ Slim & Comfortable — 1.75cm low-profile shell keeps the APX chassis balanced on the duty belt, ideal for uniformed patrol and all-day wear
• ⭐ Mission-Critical Reliability — Engineered for P25 public safety duty: stable voltage delivery under high transmit load, 100% aging tested before shipment
• ⭐ Industrial Craftsmanship & Warranty — Manufactured under strict aging test procedure, OEM private label and bulk customization available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice swelling, unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Li-ion compatible CC/CV (constant current / constant voltage) charger rated for 8.4V charging voltage. Do NOT use a Ni-CD / Ni-MH charger on this Li-ion battery — the cutoff logic is completely different and may cause overcharge, overheating or permanent damage.

• ⚠ Do not store the battery fully discharged for long periods. For long-term storage, keep the pack at approximately 40-60% charge in a cool dry place and recharge every 3 months. This Li-ion battery contains regulated lithium cells — do not dispose of it with household waste; return the spent battery to an authorized battery recycling collection point in compliance with local regulations.