ENL-MOT4416 7.4V 1600mAh Li-ion Rechargeable Battery for Motorola DP2000 / DP2400 / DP2600 / XiR P6600 Two-way Radios

The ENL-MOT4416 replacement battery is fully compatible with the following Motorola two-way radio models:

✅ Faithful OEM Replacement for Motorola DP2000 / DP2600 Series
Direct replacement for Motorola OEM battery PMNN4416, supporting the DP2000, DP2400, DP2600 professional digital series and XiR P6600 hand-portables trusted across construction, manufacturing, logistics, security and event operations. Plug-and-play fit, no modification required.

✅ 1600mAh Li-ion Cell Pack with 5-Protection BMS
Premium long-cycle Li-ion cells deliver stable 7.4V output and rated 1600mAh capacity for typical 8-10 hour operation under standard DMR digital duty cycles (5-5-90). Built-in smart BMS module provides over current protection (OCP), over charge protection (OVP), over discharge protection (UVP), temperature sensor and reverse polarity protection — comprehensive safeguard against field failures in daily industrial use.

✅ Slim Low-Profile Housing & Ultrasonic Welding Sealing
Robust ABS/PC composite housing with ultrasonic integrated welding sealing, golden plated brass low-resistance contacts — anti-drop, dustproof and moisture resistant. The slim 11.40*5.52*1.75cm form factor faithfully follows the original PMNN4416 battery dimensions, keeping the radio light and compact for comfortable full-shift belt carry.

• ⭐ OEM PMNN4416 Replacement — Faithfully matches original slim dimensions (11.40*5.52*1.75cm), drop-in fit for DP2000/DP2400/DP2600 and XiR P6600 radios without chassis modification
• ⭐ 1600mAh Capacity, 7.4V Stable Output — Dependable standard-shift operation on a single charge, low self-discharge, no memory effect thanks to Li-ion chemistry
• ⭐ Slim & Lightweight — 1.75cm low-profile shell at only approx. 150g keeps the radio balanced and comfortable, ideal for all-day belt wear
• ⭐ Built for Work Environments — High impact ABS/PC housing engineered for construction sites, plants, warehouses and outdoor patrols; 100% aging tested before shipment
• ⭐ Industrial Craftsmanship & Warranty — Manufactured under strict aging test procedure, OEM private label and bulk customization available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice swelling, unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Li-ion compatible CC/CV (constant current / constant voltage) charger rated for 8.4V charging voltage — including your existing Motorola PMNN4416 Li-ion charger or IMPRES charger. Do NOT use a Ni-CD / Ni-MH charger on this Li-ion battery — the cutoff logic is completely different and may cause overcharge, overheating or permanent damage.

• ⚠ Do not store the battery fully discharged for long periods. For long-term storage, keep the pack at approximately 40-60% charge in a cool dry place and recharge every 3 months. This Li-ion battery contains regulated lithium cells — do not dispose of it with household waste; return the spent battery to an authorized battery recycling collection point in compliance with local regulations.