ENH-MOT9049 7.2V 2000mAh Ni-MH Rechargeable Battery for Motorola P1225 Two-way Radios

The ENH-MOT9049 replacement battery is fully compatible with the following Motorola two-way radio models:

✅ Faithful OEM Replacement for Motorola P1225 Legacy Fleet
Direct replacement for Motorola OEM battery HNN9049, purpose-built for the Motorola P1225 professional portable platform. Plug-and-play fit, no modification required — the cost-effective way to keep a proven legacy fleet in service instead of retiring working radios. Because it is Ni-MH chemistry, your existing P-series Ni-MH / Ni-CD chargers keep working without any new charging infrastructure.

✅ 2000mAh High-Capacity Ni-MH Cell Pack
Premium high quality long-cycle Ni-MH cells deliver stable 7.2V output and rated 2000mAh capacity for typical 10-12 hour operation under standard analog duty cycles (5-5-90) — a substantial capacity upgrade over many original HNN9049 packs. Ni-MH chemistry performs reliably under high transmit load and cold-weather field conditions, with no toxic cadmium content — an economical and environmentally responsible power solution for legacy fleets.

✅ Rugged Housing & Practical Protection
Robust ABS/PC composite housing with ultrasonic integrated welding sealing, golden plated brass low-resistance contacts — anti-drop, dustproof and moisture resistant. Built-in short-circuit protection, charging temperature sensor and reverse polarity protection safeguard daily fleet operations. The 14.00*5.70*2.50cm form factor faithfully follows the original HNN9049 battery dimensions for a balanced, secure fit on the radio chassis.

• ⭐ OEM HNN9049 Replacement — Faithfully matches original dimensions (14.00*5.70*2.50cm), drop-in fit for the Motorola P1225 radio without chassis modification
• ⭐ 2000mAh High Capacity, 7.2V Stable Output — Full-shift operation on a single charge; Ni-MH chemistry tolerates high transmit current draw and cold environments
• ⭐ Legacy Fleet Life Extension — Keep your proven P1225 fleet running for years at controlled cost instead of premature radio replacement
• ⭐ Cadmium-Free & Zero Charger Investment — Environmentally responsible Ni-MH chemistry that works with your existing P-series Ni-MH / Ni-CD chargers
• ⭐ Industrial Craftsmanship & Warranty — Golden plated brass contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice swelling, unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Ni-MH compatible charger using negative delta-V or timer-based cutoff logic rated for 7.2V Ni-MH packs — including your existing Motorola P-series Ni-MH / Ni-CD charger. Do NOT use a Li-ion CC/CV 8.4V charger on this Ni-MH battery — the charging logic is completely different and may cause overheating or permanent damage.

• ⚠ Do not store the battery fully discharged for long periods. For long-term storage, keep the pack in a cool dry place and recharge every 3 months. This battery is cadmium-free Ni-MH chemistry and contains no toxic heavy-metal cadmium — please still return the spent battery to an authorized battery recycling collection point in compliance with local regulations.