ENH-BP196 9.6V 1800mAh Ni-MH Rechargeable Battery for ICOM IC-F3 / IC-F4 / IC-F3GT / IC-F4S / IC-T2A / IC-T2E / IC-A4 Series Walkie Talkies

The ENH-BP196 replacement battery is fully compatible with the following ICOM and EF Johnson two-way radio models:

✅ Faithful OEM Replacement for ICOM IC-F3 / IC-F4 / IC-T2 Series Radios
Direct replacement for ICOM OEM battery BP-196H, supporting the classic 9.6V handheld generation: IC-F3, IC-F3S, IC-F3GT, IC-F3X, IC-F4, IC-F4S, IC-F4TR, aviation handheld IC-A4, amateur IC-T2A/IC-T2E/IC-T2H, plus the EF Johnson 587-7500-105 professional radio. Plug-and-play fit, no modification required.

✅ 1800mAh High-Capacity Ni-MH Cell Pack
Premium long-cycle Ni-MH cells deliver stable 9.6V output and rated 1800mAh capacity — a high-capacity upgrade over the original BP-196H pack — for typical 9-11 hour full-shift operation. Ni-MH chemistry contains no cadmium, works directly with the radio's original Ni-MH charger, and keeps legacy ICOM fleets running without any recharging infrastructure changes.

✅ Rugged Housing & Ultrasonic Welding Sealing
Robust ABS/PC composite housing with ultrasonic integrated welding sealing, golden plated brass low-resistance contacts, built-in short-circuit protection — anti-drop, dustproof and moisture resistant. The 13.53*5.78*2.20cm form factor faithfully follows the original BP-196H battery dimensions for a balanced, secure fit on classic ICOM chassis.

• ⭐ OEM BP-196H Replacement — Faithfully matches original dimensions (13.53*5.78*2.20cm), drop-in fit for all listed IC-F3/F4, IC-A4 and IC-T2 series radios without chassis modification
• ⭐ 1800mAh High Capacity, 9.6V Stable Output — Full-shift operation on a single charge, works with the original Ni-MH charger, no charger upgrade needed
• ⭐ Legacy Fleet Life Extension — Keeps the proven 9.6V ICOM generation in service for years more, ideal for organizations still standard on IC-F3/F4/T2 hardware
• ⭐ Wide Temperature Tolerance — Performs reliably across -20 degrees C to 60 degrees C working range, ideal for outdoor and industrial environments
• ⭐ Eco-Friendly Ni-MH Chemistry — Cadmium-free nickel-metal hydride cells, RoHS compliant, environmentally responsible disposal; OEM private label and bulk customization available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, leakage or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Ni-MH compatible charger using negative delta-V or timer cutoff logic. Do NOT use a Li-ion CC/CV charger on this Ni-MH battery — the termination logic is completely different and may cause overcharge, overheating or permanent damage.

• ⚠ Do not store the battery fully discharged for long periods. For long-term storage, keep the pack in a cool dry place and recharge every 3 months. Occasional full discharge/charge cycles help maintain accurate capacity on Ni-MH packs. This battery is cadmium-free — dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations.